Silinder elektrik · Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan
EDA115Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan EDA115
EDA115 tergolong dalam Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan di katalog Silinder elektrik.
EDA115 · Silinder elektrik dan penggerak linear
Silinder menyediakan pemanjangan berpandu. Tetapkan daya tujahan, lejang, kelajuan, kitaran dan sambungan beban sebagai satu keperluan pemasangan.
Membandingkan EDA115
Untuk EDA115, baca Ketepatan kedudukan | tahap ketepatan, Diameter bebola, Kekakuan skru bebola mengikut kumpulan parameter dan varian yang ditunjukkan. Bandingkan lukisan skru dan sambungan. Semak daya, pemanjangan dan kelajuan bersama; had berasingan tidak menetapkan titik operasi.
Parameter dan kebolehgunaannya
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Ball diameter | 3.175mm mm |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4010-4; Source column: Ball diameter | 6.35mm mm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Ball screw rigidity | 63Kgf/μm Kgf/μm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4010-4; Source column: Ball screw rigidity | 73Kgf/μm Kgf/μm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4020-2.8; Source column: Ball screw rigidity | 54Kgf/μm Kgf/μm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Ball screw rigidity | 34Kgf/μm Kgf/μm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Ball screw rigidity | 52Kgf/μm Kgf/μm |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 60 |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: C | 40 |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: C | — |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: C | — |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: C | — |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Ca (KN) | 20.6 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4010-4; Source column: Ca (KN) | 52.9 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4020-2.8; Source column: Ca (KN) | 38.8 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Ca (KN) | 25.3 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Ca (KN) | 37 KN |
| Jarak pusat roda segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 176mm mm |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Coa (KN) | 78.3 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4010-4; Source column: Coa (KN) | 152 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4020-2.8; Source column: Coa (KN) | 105 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Coa (KN) | 65 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Coa (KN) | 101.4 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: angular contact ball bearing 7009C/DT; Source column: Cor (KN) | 19.3 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Flat thrust bearing 51309; Source column: Cor (KN) | 163 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: angular contact ball bearing 7009C/DT; Source column: Cr (KN) | 24.4 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Flat thrust bearing 51309; Source column: Cr (KN) | 80 KN |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 110 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: D | 30 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: D | 215 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: D | 140 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: D | 215 |
| Diameter Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Diameter | 40 mm mm |
| Spesifikasi gear dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 8M50T59 T |
| Spesifikasi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 8M50T59 T |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | 5 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: E | 5 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: E | 5 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: E | 5 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: E | 5 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 14 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: F | — |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: F | 35 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: F | 25 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: F | 35 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | — |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: G | — |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: G | — |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: G | — |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: G | 70 |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: H | 55 |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: H | 73 |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Lead of ball screw | 05mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4010-4; Source column: Lead of ball screw | 10mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4020-2.8; Source column: Lead of ball screw | 20mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Lead of ball screw | 40mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA4040-1.8; Source column: Lead of ball screw | 40mm mm |
| Suis had Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 112x112 mm; Source column: | Magnetic switch |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M40x1.5 |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: M | M24 |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: M | — |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: M | — |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: M | — |
| Kelajuan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 112x112 mm; Source column: | ≤250 mm/s mm/s |
| Daya tujahan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 112x112 mm; Source column: Maximum thrust allowed | ≤50KN KN |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 13A |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 180A |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 40 |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of active gear teeth | 30 |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of active gear teeth | 30 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 40 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of driven wheel teeth | 45 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of driven wheel teeth | 60 |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | 115A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | 80A 100A 、 、130A、180A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 142A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 130A、180A |
| Sudut putaran rod omboh Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 112x112 mm; Source column: Maximum allowed speed Rotation angle of piston rod Limit switch | ±0.3° ° |
| Scalable length Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 112x112 mm; Source column: Scalable length | ≤2000mm mm |
| Aci skru Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Screw shaft | 35K10 |
| Nisbah kelangsingan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Slenderness ratio | 1:50 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 672 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Synchronous belt circumference | 656 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Synchronous belt circumference | 720 |
| Lebar tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 50mm mm |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1.5:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 2:1 |
| Jenis Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU4005-4; Source column: Type | Ball screw |
| Diameter dalaman Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 112x112 mm; Source column: internal diameter | φ100mm mm |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | Φ90 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦA | Φ90 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦA | Φ90 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦA | Φ90 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦA | Φ90 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ75 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦB | Φ75 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦB | Φ75 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦB | Φ75 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦB | Φ75 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦC | — |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦC | Φ35 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦC | Φ35 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦC | Φ35 |
Parameter asas
| Diameter luar | Diameter dalaman | Daya tujahan maksimum yang dibenarkan | Scalable length | Maximum allowed speed Rotation angle of piston rod Limit switch | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 112x112 mm | φ100mm mm | ≤50KN KN | ≤2000mm mm | ≤250 mm/s | ±0.3° ° | Magnetic switch | |||||||||||||||||||||
Pilihan yang disenaraikan dalam sumber
| Jarak pendahuluan skru bebola | Nisbah kelajuan roda segerak (input: output) | Spesifikasi motor yang boleh dipasang terus | Reducer yang boleh dipadankan | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 05mm mm | 1:1 | 1.5:1 | 2:1 | 13A | 180A | 115A | 80A 100A 、 、130A、180A | ||||||||
| 10mm mm | |||||||||||||||
| 20mm mm | 142A | 130A、180A | |||||||||||||
| 40mm mm | |||||||||||||||
Parameter skru bebola
| Model skru bebola | Jenis | Diameter | Jarak pendahuluan skru bebola | Ca (KN) | Coa (KN) | Kekakuan skru bebola | Diameter bebola | Aci skru | Nisbah kelangsingan | Ketepatan kedudukan | tahap ketepatan | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFNU4005-4 | Ball screw | 40 mm | 05mm mm | 20.6 KN | 78.3 KN | 63Kgf/μm Kgf/μm | 3.175mm mm | 35K10 | 1:50 | C5/±0.01 | C7/±0.02 | ||||||||||||||||
| SFNU4010-4 | 10mm mm | 52.9 KN | 152 KN | 73Kgf/μm Kgf/μm | 6.35mm mm | ||||||||||||||||||||||
| SFA4020-2.8 | 20mm mm | 38.8 KN | 105 KN | 54Kgf/μm Kgf/μm | |||||||||||||||||||||||
| SFA4040-1.8 | 40mm mm | 25.3 KN | 65 KN | 34Kgf/μm Kgf/μm | |||||||||||||||||||||||
| SFA4040-1.8 | 40mm mm | 37 KN | 101.4 KN | 52Kgf/μm Kgf/μm | |||||||||||||||||||||||
Parameter galas
| Model galas | Cr (KN) | Cor (KN) | ||||
|---|---|---|---|---|---|---|
| angular contact ball bearing 7009C/DT | 24.4 KN | 19.3 KN | ||||
| Flat thrust bearing 51309 | 80 KN | 163 KN | ||||
Takal pemasaan dan tali sawat
| Nisbah kelajuan roda segerak | Spesifikasi gear pemacu | Spesifikasi gear dipacu | Bilangan gigi gear pemacu | Bilangan gigi roda dipacu | Jarak pusat roda segerak | Lilitan tali sawat segerak | Lebar tali sawat segerak | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 8M50T59 T | 8M50T59 T | 40 | 40 | 176mm mm | 672 | 50mm mm | |||||||||
| 1.5:1 | 30 | 45 | 656 | |||||||||||||
| 2:1 | 30 | 60 | 720 | |||||||||||||
Jadual padanan dimensi (mm)
| Jenis sambungan beban | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | Φ90 | Φ75 | — | 60 | 110 | 5 | 14 | — | — | M40x1.5 | ||||||||||||
| Internal thread | Φ90 | Φ75 | — | 40 | 30 | 5 | — | — | — | M24 | ||||||||||||
| Type I connector | Φ90 | Φ75 | Φ35 | — | 215 | 5 | 35 | 55 | — | — | ||||||||||||
| Fisheye bearing | Φ90 | Φ75 | Φ35 | — | 140 | 5 | 25 | — | — | — | ||||||||||||
| Y-joint | Φ90 | Φ75 | Φ35 | — | 215 | 5 | 35 | 73 | 70 | — | ||||||||||||
Bercakap dengan HTROBOT
- E-melemmy@htrobot.com
- Telefon+86 152 0225 5004
- Kedai AlibabaLawati kedai Alibaba kami