Silinder elektrik · Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan EDA160
EDA160Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan EDA160 · EDA160
EDA160 tergolong dalam Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan EDA160 di katalog Silinder elektrik.
EDA160 · Silinder elektrik dan penggerak linear
Silinder menyediakan pemanjangan berpandu. Tetapkan daya tujahan, lejang, kelajuan, kitaran dan sambungan beban sebagai satu keperluan pemasangan.
Membandingkan EDA160
Untuk EDA160, baca Ketepatan kedudukan | tahap ketepatan, Diameter bebola, Kekakuan skru bebola mengikut kumpulan parameter dan varian yang ditunjukkan. Bandingkan lukisan skru dan sambungan. Semak daya, pemanjangan dan kelajuan bersama; had berasingan tidak menetapkan titik operasi.
Parameter dan kebolehgunaannya
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Ball diameter | 12.7mm mm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Ball screw rigidity | / |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 80 |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Ca (KN) | 326.2 KN |
| Jarak pusat roda segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 210mm mm |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Coa (KN) | 774.7 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Angular contact ball bearing 7212C/DT; Source column: Cor (KN) | 48.3 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Thrust self-aligning roller bearing 29412; Source column: Cor (KN) | 900 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Angular contact ball bearing 7212C/DT; Source column: Cr (KN) | 61 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Thrust self-aligning roller bearing 29412; Source column: Cr (KN) | 335 KN |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 120 |
| Diameter Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Diameter | 63 mm mm |
| Spesifikasi gear dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 14M65T76.5 T |
| Spesifikasi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 14M65T86.5 T |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | — |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 16 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Lead of ball screw | 20mm mm |
| Suis had Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 158x158 mm; Source column: Limit switch | Proximity switch |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M60x2 |
| Kelajuan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 158x158 mm; Source column: Maximum allowed speed Rotation angle of piston rod | ≤250 mm/s mm/s |
| Daya tujahan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 158x158 mm; Source column: Maximum thrust allowed | ≤180KN KN |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Motor specifications that can be directly installed | NO |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 36 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 36 |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 142A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 130A、180A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 180A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 180A、200A、220A |
| Sudut putaran rod omboh Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 158x158 mm; Source column: | ±0.3° ° |
| Scalable length Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 158x158 mm; Source column: Scalable length | ≤2000mm mm |
| Aci skru Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Screw shaft | 50K14 |
| Nisbah kelangsingan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Slenderness ratio | 1:50 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 924 |
| Lebar tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 65mm mm |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | / |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | / |
| Jenis Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JFZ6320-8; Source column: Type | Ball screw |
| Diameter dalaman Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 158x158 mm; Source column: internal diameter | φ140mm mm |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | — |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ100 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
Parameter asas
| Diameter luar | Diameter dalaman | Daya tujahan maksimum yang dibenarkan | Scalable length | Maximum allowed speed Rotation angle of piston rod | Suis had | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 158x158 mm | φ140mm mm | ≤180KN KN | ≤2000mm mm | ≤250 mm/s | ±0.3° ° | Proximity switch | ||||||||||||||||||||
Pilihan yang disenaraikan dalam sumber
| Jarak pendahuluan skru bebola | Nisbah kelajuan roda segerak (input: output) | Spesifikasi motor yang boleh dipasang terus | Reducer yang boleh dipadankan | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20mm mm | 1:1 | / | / | NO | 142A | 130A、180A | |||||||||
| 180A | 180A、200A、220A | ||||||||||||||
Parameter skru bebola
| Model skru bebola | Jenis | Diameter | Jarak pendahuluan skru bebola | Ca (KN) | Coa (KN) | Kekakuan skru bebola | Diameter bebola | Aci skru | Nisbah kelangsingan | Ketepatan kedudukan | tahap ketepatan | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| JFZ6320-8 | Ball screw | 63 mm | 20mm mm | 326.2 KN | 774.7 KN | / | 12.7mm mm | 50K14 | 1:50 | C5/±0.01 | C7/±0.02 | ||||||||||||||
Parameter galas
| Model galas | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Angular contact ball bearing 7212C/DT | 61 KN | 48.3 KN | |||
| Thrust self-aligning roller bearing 29412 | 335 KN | 900 KN |
Takal pemasaan dan tali sawat
| Nisbah kelajuan roda segerak | Spesifikasi gear pemacu | Spesifikasi gear dipacu | Bilangan gigi gear pemacu | Bilangan gigi roda dipacu | Jarak pusat roda segerak | Lilitan tali sawat segerak | Lebar tali sawat segerak | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 14M65T86.5 T | 14M65T76.5 T | 36 | 36 | 210mm mm | 924 | 65mm mm | ||||||||
Jadual padanan dimensi (mm)
| Jenis sambungan beban | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | — | Φ100 | — | 80 | 120 | — | 16 | — | — | M60x2 | ||||||||||||||
Bercakap dengan HTROBOT
- E-melemmy@htrobot.com
- Telefon+86 152 0225 5004
- Kedai AlibabaLawati kedai Alibaba kami