Silinder elektrik · Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan
EDA300Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan · EDA300
EDA300 tergolong dalam Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan di katalog Silinder elektrik.
EDA300 · Silinder elektrik dan penggerak linear
Silinder menyediakan pemanjangan berpandu. Tetapkan daya tujahan, lejang, kelajuan, kitaran dan sambungan beban sebagai satu keperluan pemasangan.
Membandingkan EDA300
Untuk EDA300, baca Ketepatan kedudukan | tahap ketepatan, Diameter bebola, Kekakuan skru bebola mengikut kumpulan parameter dan varian yang ditunjukkan. Bandingkan lukisan skru dan sambungan. Semak daya, pemanjangan dan kelajuan bersama; had berasingan tidak menetapkan titik operasi.
Parameter dan kebolehgunaannya
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Ball diameter | 12.7mm mm |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10025-8; Source column: Ball diameter | 15.875mm mm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Ball screw rigidity | / |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10025-8; Source column: Ball screw rigidity | / |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Ca (KN) | 444.9 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10025-8; Source column: Ca (KN) | 603.3 KN |
| Jarak pusat roda segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 280mm mm |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Coa (KN) | 1526.9 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10025-8; Source column: Coa (KN) | 1891.2 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Deep groove ball 6217-ZZx2; Source column: Cor (KN) | 63.8 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Thrust self-aligning roller bearing 29417; Source column: Cor (KN) | 1730 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Deep groove ball 6217-ZZx2; Source column: Cr (KN) | 83.3 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Thrust self-aligning roller bearing 29417; Source column: Cr (KN) | 600 KN |
| Diameter Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Diameter | 100 mm mm |
| Spesifikasi gear dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 14M50T86 T |
| Spesifikasi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 14M50T86 T |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Lead of ball screw | 20mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10025-8; Source column: Lead of ball screw | 25mm mm |
| Suis had Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: Φ280 mm; Source column: Limit switch | Proximity switch |
| Kelajuan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: Φ280 mm; Source column: Maximum allowed speed Rotation angle of piston rod | ≤250 mm/s mm/s |
| Daya tujahan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: Φ280 mm; Source column: Maximum thrust allowed | ≤600KN KN |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Motor specifications that can be directly installed | NO |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 45 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 45 |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 220A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 180A、200A、220A |
| Sudut putaran rod omboh Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: Φ280 mm; Source column: | ±0.3° ° |
| Scalable length Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: Φ280 mm; Source column: Scalable length | ≤2000mm mm |
| Aci skru Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Screw shaft | 75K20 |
| Nisbah kelangsingan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Slenderness ratio | 1:50 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 1190 |
| Lebar tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 50mm mm |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | / |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | / |
| Jenis Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: JF10020-8; Source column: Type | Ball screw |
| Diameter dalaman Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: Φ280 mm; Source column: internal diameter | φ230mm mm |
Parameter asas
| Diameter luar | Diameter dalaman | Daya tujahan maksimum yang dibenarkan | Scalable length | Maximum allowed speed Rotation angle of piston rod | Suis had | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Φ280 mm | φ230mm mm | ≤600KN KN | ≤2000mm mm | ≤250 mm/s | ±0.3° ° | Proximity switch | ||||||||||||||||||||||||||
Pilihan yang disenaraikan dalam sumber
| Jarak pendahuluan skru bebola | Nisbah kelajuan roda segerak (input: output) | Spesifikasi motor yang boleh dipasang terus | Reducer yang boleh dipadankan | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20mm mm | 1:1 | / | / | NO | 220A | 180A、200A、220A | |||||||
| 25mm mm | |||||||||||||
Parameter skru bebola
| Model skru bebola | Jenis | Diameter | Jarak pendahuluan skru bebola | Ca (KN) | Coa (KN) | Kekakuan skru bebola | Diameter bebola | Aci skru | Nisbah kelangsingan | Ketepatan kedudukan | tahap ketepatan | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| JF10020-8 | Ball screw | 100 mm | 20mm mm | 444.9 KN | 1526.9 KN | / | 12.7mm mm | 75K20 | 1:50 | C5/±0.01 | C7/±0.02 | ||||||||||||||||||||
| JF10025-8 | 25mm mm | 603.3 KN | 1891.2 KN | / | 15.875mm mm | ||||||||||||||||||||||||||
Parameter galas
| Model galas | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Deep groove ball 6217-ZZx2 | 83.3 KN | 63.8 KN | |||
| Thrust self-aligning roller bearing 29417 | 600 KN | 1730 KN |
Takal pemasaan dan tali sawat
| Nisbah kelajuan roda segerak | Spesifikasi gear pemacu | Spesifikasi gear dipacu | Bilangan gigi gear pemacu | Bilangan gigi roda dipacu | Jarak pusat roda segerak | Lilitan tali sawat segerak | Lebar tali sawat segerak | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 14M50T86 T | 14M50T86 T | 45 | 45 | 280mm mm | 1190 | 50mm mm | ||||||||||||||
Bercakap dengan HTROBOT
- Miniature Pneumatic Cylinder Motor Servo Electric Actuator Valve Underfloor Linear IP65 12v 24v Electric High Speed ↗
Produk siri Alibaba · EDA300
Rujukan siri; sahkan konfigurasi semasa dengan penjual.
- E-melemmy@htrobot.com
- Telefon+86 152 0225 5004
- Kedai AlibabaLawati kedai Alibaba kami