Silinder elektrik · Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan
EDA94Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan · EDA94
EDA94 tergolong dalam Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan di katalog Silinder elektrik.
EDA94 · Silinder elektrik dan penggerak linear
Silinder menyediakan pemanjangan berpandu. Tetapkan daya tujahan, lejang, kelajuan, kitaran dan sambungan beban sebagai satu keperluan pemasangan.
Membandingkan EDA94
Untuk EDA94, baca Ketepatan kedudukan | tahap ketepatan, Diameter bebola, C mengikut kumpulan parameter dan varian yang ditunjukkan. Bandingkan lukisan skru dan sambungan. Semak daya, pemanjangan dan kelajuan bersama; had berasingan tidak menetapkan titik operasi.
Parameter dan kebolehgunaannya
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Ball diameter | 3.175mm mm |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3210-4; Source column: Ball diameter | 6.35mm mm |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3220-2.8; Source column: Ball diameter | 3.969mm mm |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3232-1.8; Source column: Ball diameter | 3.969mm mm |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 50 |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: C | 40 |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: C | — |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: C | — |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: C | — |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Ca (KN) | 18.8 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3210-4; Source column: Ca (KN) | 47.1 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3220-2.8; Source column: Ca (KN) | 18.7 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3232-1.8; Source column: Ca (KN) | 12.3 KN |
| Jarak pusat roda segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 116mm mm |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Coa (KN) | 62.2 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3210-4; Source column: Coa (KN) | 119.7 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3220-2.8; Source column: Coa (KN) | 53.7 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3232-1.8; Source column: Coa (KN) | 33.5 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Tapered roller 31305x2; Source column: Cor (KN) | 40 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Tapered roller 31305x2; Source column: Cr (KN) | 38 KN |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 80 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: D | 30 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: D | 195 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: D | 94 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: D | 195 |
| Diameter Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Diameter | 32 mm mm |
| Spesifikasi gear dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 8M30T38 T |
| Spesifikasi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 8M30T48 T |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: E | 3 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 14 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: F | — |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: F | 35 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: F | 37 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: F | 35 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | 55 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: G | 55 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: G | 55 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: G | 55 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: G | 70 |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: H | 55 |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: H | 73 |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Lead of ball screw | 05mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3210-4; Source column: Lead of ball screw | 10mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3220-2.8; Source column: Lead of ball screw | 20mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3232-1.8; Source column: Lead of ball screw | 32mm mm |
| Suis had Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 94x94 mm; Source column: | Magnetic switch |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M40x1.5 |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: M | M24 |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: M | — |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: M | — |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: M | — |
| Kelajuan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 94x94 mm; Source column: | ≤1000 mm/s mm/s |
| Daya tujahan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 94x94 mm; Source column: Maximum thrust allowed | ≤30KN KN |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 80A |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 100A |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 130A |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 30 |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of active gear teeth | 20 |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of active gear teeth | 20 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 30 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of driven wheel teeth | 30 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of driven wheel teeth | 40 |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | NO |
| Sudut putaran rod omboh Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 94x94 mm; Source column: Maximum allowed speed Rotation angle of piston rod Limit switch | ±0.3° ° |
| Scalable length Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 94x94 mm; Source column: Scalable length | ≤960 mm mm |
| Aci skru Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Screw shaft | 22K6 |
| Nisbah kelangsingan Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Slenderness ratio | 1:30 |
| Steel properties Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Steel properties | 54Kgf/μm Kgf/μm |
| Steel properties Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3210-4; Source column: Steel properties | 61Kgf/μm Kgf/μm |
| Steel properties Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3220-2.8; Source column: Steel properties | 43Kgf/μm Kgf/μm |
| Steel properties Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA3232-1.8; Source column: Steel properties | 27Kgf/μm Kgf/μm |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 472 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Synchronous belt circumference | 432 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Synchronous belt circumference | 480 |
| Lebar tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 30mm mm |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1.5:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 2:1 |
| Jenis Keadaan sumber; belum distrukturkan · (Note: The lead screw load is for a stroke of ≤ 300mm, and for a stroke greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU3205-4; Source column: Type | Ball screw |
| Diameter dalaman Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 94x94 mm; Source column: internal diameter | φ80mm mm |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | Φ80 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦA | Φ80 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦA | Φ80 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦA | Φ80 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦA | Φ80 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ60 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦB | Φ60 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦB | Φ60 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦB | Φ60 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦB | Φ60 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦC | — |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦC | Φ35 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦC | Φ30 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦC | Φ35 |
Parameter asas
| Diameter luar | Diameter dalaman | Daya tujahan maksimum yang dibenarkan | Scalable length | Maximum allowed speed Rotation angle of piston rod Limit switch | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 94x94 mm | φ80mm mm | ≤30KN KN | ≤960 mm | ≤1000 mm/s | ±0.3° ° | Magnetic switch | ||||||||||||||||||||
Pilihan yang disenaraikan dalam sumber
| Jarak pendahuluan skru bebola | Nisbah kelajuan roda segerak (input: output) | Spesifikasi motor yang boleh dipasang terus | Reducer yang boleh dipadankan | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 05mm mm | 1:1 | 1.5:1 | 2:1 | 80A | 100A | 130A | NO | ||||||
| 10mm mm | |||||||||||||
| 20mm mm | |||||||||||||
| 32mm mm | |||||||||||||
Parameter skru bebola
| Model skru bebola | Jenis | Diameter | Jarak pendahuluan skru bebola | Ca (KN) | Coa (KN) | Steel properties | Diameter bebola | Aci skru | Nisbah kelangsingan | Ketepatan kedudukan | tahap ketepatan | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFNU3205-4 | Ball screw | 32 mm | 05mm mm | 18.8 KN | 62.2 KN | 54Kgf/μm Kgf/μm | 3.175mm mm | 22K6 | 1:30 | C5/±0.01 | C7/±0.02 | |||||||||||||||
| SFNU3210-4 | 10mm mm | 47.1 KN | 119.7 KN | 61Kgf/μm Kgf/μm | 6.35mm mm | |||||||||||||||||||||
| SFA3220-2.8 | 20mm mm | 18.7 KN | 53.7 KN | 43Kgf/μm Kgf/μm | 3.969mm mm | |||||||||||||||||||||
| SFA3232-1.8 | 32mm mm | 12.3 KN | 33.5 KN | 27Kgf/μm Kgf/μm | 3.969mm mm | |||||||||||||||||||||
Parameter galas
| Model galas | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Tapered roller 31305x2 | 38 KN | 40 KN | |||
Takal pemasaan dan tali sawat
| Nisbah kelajuan roda segerak | Spesifikasi gear pemacu | Spesifikasi gear dipacu | Bilangan gigi gear pemacu | Bilangan gigi roda dipacu | Jarak pusat roda segerak | Lilitan tali sawat segerak | Lebar tali sawat segerak | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 8M30T48 T | 8M30T38 T | 30 | 30 | 116mm mm | 472 | 30mm mm | |||||||||
| 1.5:1 | 20 | 30 | 432 | |||||||||||||
| 2:1 | 20 | 40 | 480 | |||||||||||||
Jadual padanan dimensi (mm)
| Jenis sambungan beban | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | Φ80 | Φ60 | — | 50 | 80 | 3 | 14 | — | 55 | M40x1.5 | ||||||||||||
| Internal thread | Φ80 | Φ60 | — | 40 | 30 | 3 | — | — | 55 | M24 | ||||||||||||
| Type I connector | Φ80 | Φ60 | Φ35 | — | 195 | 3 | 35 | 55 | 55 | — | ||||||||||||
| Fisheye bearing | Φ80 | Φ60 | Φ30 | — | 94 | 3 | 37 | — | 55 | — | ||||||||||||
| Y-joint | Φ80 | Φ60 | Φ35 | — | 195 | 3 | 35 | 73 | 70 | — | ||||||||||||
Bercakap dengan HTROBOT
- 2024 Customized All Size Stroke Servo Linear Actuator Cylinder in China 10 Aluminum Press Machine Durable Provided Standard Pull ↗
Produk siri Alibaba · EDA94
Lagi pautan Alibaba (3)
- High Speed Electric Servo Linear Actuator for Industrial Automation ↗
Produk siri Alibaba · EDA94
- High Thrust Electric Servo Linear Actuator Cylinder 220V Industrial Use 10 Aluminum Press Machine Durable Provided Standard Pull ↗
Produk siri Alibaba · EDA94
- Miniature Pneumatic Cylinder Motor Servo Electric Actuator Valve Underfloor Linear IP65 12v 24v Electric High Speed ↗
Produk siri Alibaba · EDA94
Rujukan siri; sahkan konfigurasi semasa dengan penjual.
- E-melemmy@htrobot.com
- Telefon+86 152 0225 5004
- Kedai AlibabaLawati kedai Alibaba kami