Electric cylinders · High-precision, high-load servo electric cylinder with customizable stroke EDA160
EDA160High-precision, high-load servo electric cylinder with customizable stroke EDA160 · EDA160
EDA160 belongs to High-precision, high-load servo electric cylinder with customizable stroke EDA160 in the Electric cylinders catalog.
EDA160 · Electric cylinders and linear actuators
An electric cylinder supplies a guided extension motion. Prepare the required thrust, stroke, speed, working cycle and load connection as one assembly requirement.
Comparing EDA160
For EDA160, read Accuracy Positioning | accuracy level, Ball diameter, Ball screw rigidity by the parameter group and variant shown. Compare screw and connection drawings for the proposed assembly. Check thrust, extension and speed together; separate upper limits do not establish a usable operating point.
Parameters and where they apply
| Accuracy Positioning | accuracy level Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Accuracy Positioning | accuracy level Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Ball diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Ball diameter | 12.7mm mm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Ball screw rigidity | / |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 80 |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Ca (KN) | 326.2 KN |
| Center distance of synchronous wheel Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 210mm mm |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Coa (KN) | 774.7 KN |
| Cor (KN) Current technical model · Bearing parameters:; Source row: Angular contact ball bearing 7212C/DT; Source column: Cor (KN) | 48.3 KN |
| Cor (KN) Current technical model · Bearing parameters:; Source row: Thrust self-aligning roller bearing 29412; Source column: Cor (KN) | 900 KN |
| Cr (KN) Current technical model · Bearing parameters:; Source row: Angular contact ball bearing 7212C/DT; Source column: Cr (KN) | 61 KN |
| Cr (KN) Current technical model · Bearing parameters:; Source row: Thrust self-aligning roller bearing 29412; Source column: Cr (KN) | 335 KN |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 120 |
| Diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Diameter | 63 mm mm |
| Driven gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 14M65T76.5 T |
| Driving gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 14M65T86.5 T |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | — |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 16 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Lead of ball screw | 20mm mm |
| Limit switch Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 158x158 mm; Source column: Limit switch | Proximity switch |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M60x2 |
| Maximum allowed speed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 158x158 mm; Source column: Maximum allowed speed Rotation angle of piston rod | ≤250 mm/s mm/s |
| Maximum thrust allowed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 158x158 mm; Source column: Maximum thrust allowed | ≤180KN KN |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 20mm; Source column: Motor specifications that can be directly installed | NO |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 36 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 36 |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 142A |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 130A、180A |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 180A |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 20mm; Source column: Reducers that can be matched | 180A、200A、220A |
| Rotation angle of piston rod Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 158x158 mm; Source column: | ±0.3° ° |
| Scalable length Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 158x158 mm; Source column: Scalable length | ≤2000mm mm |
| Screw shaft Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Screw shaft | 50K14 |
| Slenderness ratio Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Slenderness ratio | 1:50 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 924 |
| Synchronous belt width Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 65mm mm |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | / |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 20mm; Source column: Synchronous wheel speed ratio (input: output) | / |
| Type Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: JFZ6320-8; Source column: Type | Ball screw |
| internal diameter Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 158x158 mm; Source column: internal diameter | φ140mm mm |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | — |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ100 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
Basic parameters
| Outer diameter | internal diameter | Maximum thrust allowed | Scalable length | Maximum allowed speed Rotation angle of piston rod | Limit switch | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 158x158 mm | φ140mm mm | ≤180KN KN | ≤2000mm mm | ≤250 mm/s | ±0.3° ° | Proximity switch | ||||||||||||||||||||
Source-listed options
| Lead of ball screw | Synchronous wheel speed ratio (input: output) | Motor specifications that can be directly installed | Reducers that can be matched | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20mm mm | 1:1 | / | / | NO | 142A | 130A、180A | |||||||||
| 180A | 180A、200A、220A | ||||||||||||||
Ball-screw parameters
| Ball screw model | Type | Diameter | Lead of ball screw | Ca (KN) | Coa (KN) | Ball screw rigidity | Ball diameter | Screw shaft | Slenderness ratio | Accuracy Positioning | accuracy level | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| JFZ6320-8 | Ball screw | 63 mm | 20mm mm | 326.2 KN | 774.7 KN | / | 12.7mm mm | 50K14 | 1:50 | C5/±0.01 | C7/±0.02 | ||||||||||||||
Bearing parameters
| Bearing model | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Angular contact ball bearing 7212C/DT | 61 KN | 48.3 KN | |||
| Thrust self-aligning roller bearing 29412 | 335 KN | 900 KN |
Timing pulleys and belt
| Synchronous wheel speed ratio | Driving gear specifications | Driven gear specifications | Number of active gear teeth | Number of driven wheel teeth | Center distance of synchronous wheel | Synchronous belt circumference | Synchronous belt width | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 14M65T86.5 T | 14M65T76.5 T | 36 | 36 | 210mm mm | 924 | 65mm mm | ||||||||
Dimension correspondence table (mm)
| Load connection type | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | — | Φ100 | — | 80 | 120 | — | 16 | — | — | M60x2 | ||||||||||||||
Talk to HTROBOT
- Emailemmy@htrobot.com
- Phone+86 152 0225 5004
- Alibaba storeVisit our Alibaba store