Electric cylinders · High-precision, high-load servo electric cylinder with customizable stroke
EDA50High-precision, high-load servo electric cylinder with customizable stroke · EDA50
EDA50 belongs to High-precision, high-load servo electric cylinder with customizable stroke in the Electric cylinders catalog.
EDA50 · Electric cylinders and linear actuators
An electric cylinder supplies a guided extension motion. Prepare the required thrust, stroke, speed, working cycle and load connection as one assembly requirement.
Comparing EDA50
For EDA50, read L01, L03, L04 by the parameter group and variant shown. Compare screw and connection drawings for the proposed assembly. Check thrust, extension and speed together; separate upper limits do not establish a usable operating point.
Parameters and where they apply
| L01 Condition pending verification · Current technical model | {"L1": {"add_mm": 87, "source_variable": "Scalable length"}, "L2": {"add_mm": 180, "source_variable": "Scalable length"}} |
|---|---|
| L03 Condition pending verification · Current technical model | {"L1": {"add_mm": 87, "source_variable": "Scalable length"}, "L2": {"add_mm": 180, "source_variable": "Scalable length"}} |
| L04 Condition pending verification · Current technical model | {"L1": {"add_mm": 87, "source_variable": "Scalable length"}, "L2": {"add_mm": 180, "source_variable": "Scalable length"}} |
| L06 Condition pending verification · Current technical model | {"L1": {"add_mm": 101, "source_variable": "Scalable length"}, "L2": {"add_mm": 222, "source_variable": "Scalable length"}} |
| L07 Condition pending verification · Current technical model | {"L1": {"add_mm": 101, "source_variable": "Scalable length"}, "L2": {"add_mm": 180, "source_variable": "Scalable length"}} |
| L08 Condition pending verification · Current technical model | {"L1": {"add_mm": 101, "source_variable": "Scalable length"}, "L2": {"add_mm": 210, "source_variable": "Scalable length"}} |
| Accuracy grade Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Accuracy level | C5/±0.01 |
| Ball diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Ball diameter | 2.5mm mm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Ball screw rigidity | 19Kgf/μm Kgf/μm |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 30 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: C | 20 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: C | — |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Ca (KN) | 6.4 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1210-2.8; Source column: Ca (KN) | 6.2 KN |
| Center distance of synchronous wheel Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 60mm mm |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Coa (KN) | 12.9 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1210-2.8; Source column: Coa (KN) | 12.6 KN |
| Cor (KN) Current technical model · Bearing parameters:; Source row: Deep groove ball 6200-2RS; Source column: Cor (KN) | 2.39 KN |
| Cr (KN) Current technical model · Bearing parameters:; Source row: Deep groove ball 6200-2RS; Source column: Cr (KN) | 5.1 KN |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 50 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: D | 20 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: D | 78 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: D | 53 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: D | 78 |
| Diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Diameter | 12 mm mm |
| Driven gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 3M15T23 T |
| Driving gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 3M15T27 T |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: E | 3 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 10 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: F | — |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: F | 12 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: F | 16 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: F | 12 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | 22 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: G | 22 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: G | 22 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: G | 22 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: G | 25.4 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: H | 24 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: H | 24 |
| internal diameter Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 53x53 mm; Source column: internal diameter | φ40 mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Lead of ball screw | 05mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1210-2.8; Source column: Lead of ball screw | 10mm mm |
| Limit switch Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 53x53 mm; Source column: | Magnetic switch |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M16x1.5 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: M | M10 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: M | — |
| Maximum allowed speed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 53x53 mm; Source column: | ≤500 mm/s mm/s |
| Maximum thrust allowed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 53x53 mm; Source column: Maximum thrust allowed | ≤1.5KN KN |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 40A |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 60A |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 57B |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 32 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of active gear teeth | 32 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of active gear teeth | 24 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 32 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of driven wheel teeth | 48 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of driven wheel teeth | 48 |
| Positioning accuracy Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Positioning accuracy | C7/±0.02 |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | NO |
| Rotation angle of piston rod Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 53x53 mm; Source column: Maximum allowed speed Rotation angle of piston rod Limit switch | ±0.3° ° |
| Scalable length Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 53x53 mm; Source column: Scalable length | ≤360 mm mm |
| Screw shaft Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Screw shaft | 8K3 |
| Slenderness ratio Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Slenderness ratio | 1:30 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 216 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Synchronous belt circumference | 240 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Synchronous belt circumference | 231 |
| Synchronous belt width Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 15mm mm |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1.5:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 2:1 |
| Type Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1205-2.8; Source column: Type | Ball screw |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | Φ40 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦA | Φ40 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦA | Φ40 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦA | Φ40 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦA | Φ40 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ25 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦB | Φ25 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦB | Φ25 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦB | Φ25 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦB | Φ25 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦC | Φ12 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦC | Φ12 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦC | Φ12 |
Basic parameters
| Outer diameter | internal diameter | Maximum thrust allowed | Scalable length | Maximum allowed speed Rotation angle of piston rod Limit switch | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53x53 mm | φ40 mm | ≤1.5KN KN | ≤360 mm | ≤500 mm/s | ±0.3° ° | Magnetic switch | ||||||||||||||||||||||||||
Source-listed options
| Lead of ball screw | Synchronous wheel speed ratio (input: output) | Motor specifications that can be directly installed | Reducers that can be matched | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 05mm mm | 1:1 | 1.5:1 | 2:1 | 40A | 60A | 57B | NO | |||||||||
| 10mm mm | ||||||||||||||||
Ball-screw parameters
| Ball screw model | Type | Diameter | Lead of ball screw | Ca (KN) | Coa (KN) | Ball screw rigidity | Ball diameter | Screw shaft | Slenderness ratio | Accuracy grade | Positioning accuracy | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFA1205-2.8 | Ball screw | 12 mm | 05mm mm | 6.4 KN | 12.9 KN | 19Kgf/μm Kgf/μm | 2.5mm mm | 8K3 | 1:30 | C5/±0.01 | C7/±0.02 | |||||||||||||||||||||
| SFA1210-2.8 | 10mm mm | 6.2 KN | 12.6 KN | |||||||||||||||||||||||||||||
Bearing parameters
| Bearing model | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Deep groove ball 6200-2RS | 5.1 KN | 2.39 KN | |||
Timing pulleys and belt
| Synchronous wheel speed ratio | Driving gear specifications | Driven gear specifications | Number of active gear teeth | Number of driven wheel teeth | Center distance of synchronous wheel | Synchronous belt circumference | Synchronous belt width | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 3M15T27 T | 3M15T23 T | 32 | 32 | 60mm mm | 216 | 15mm mm | |||||||||||||||
| 1.5:1 | 32 | 48 | 240 | |||||||||||||||||||
| 2:1 | 24 | 48 | 231 | |||||||||||||||||||
Dimension correspondence table (mm)
| Load connection type | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | Φ40 | Φ25 | — | 30 | 50 | 3 | 10 | — | 22 | M16x1.5 | |||||||||||||||||
| Internal thread | Φ40 | Φ25 | — | 20 | 20 | 3 | — | — | 22 | M10 | |||||||||||||||||
| Type I connector | Φ40 | Φ25 | Φ12 | — | 78 | 3 | 12 | 24 | 22 | — | |||||||||||||||||
| Fisheye bearing | Φ40 | Φ25 | Φ12 | — | 53 | 3 | 16 | — | 22 | — | |||||||||||||||||
| Y-joint | Φ40 | Φ25 | Φ12 | — | 78 | 3 | 12 | 24 | 25.4 | — | |||||||||||||||||
Talk to HTROBOT
- EDA50 500mm 150KGLinear Type Turnback Type High Precision Electric Linear Actuator Servo Electric Cylinder Actuators ↗
Corresponding Alibaba product · EDA50
More Alibaba links (3)
- High Speed Electric Servo Linear Actuator for Industrial Automation ↗
Alibaba series product · EDA50
- High Thrust Electric Servo Linear Actuator Cylinder 220V Industrial Use 10 Aluminum Press Machine Durable Provided Standard Pull ↗
Alibaba series product · EDA50
- Miniature Pneumatic Cylinder Motor Servo Electric Actuator Valve Underfloor Linear IP65 12v 24v Electric High Speed ↗
Alibaba series product · EDA50
Confirm the configuration with the seller.
Series reference; confirm the current configuration with the seller.
- Emailemmy@htrobot.com
- Phone+86 152 0225 5004
- Alibaba storeVisit our Alibaba store