Electric cylinders · High-precision, high-load servo electric cylinder with customizable stroke EDA60
EDA60High-precision, high-load servo electric cylinder with customizable stroke EDA60
EDA60 belongs to High-precision, high-load servo electric cylinder with customizable stroke EDA60 in the Electric cylinders catalog.
EDA60 · Electric cylinders and linear actuators
An electric cylinder supplies a guided extension motion. Prepare the required thrust, stroke, speed, working cycle and load connection as one assembly requirement.
Comparing EDA60
For EDA60, read L01, L03, L04 by the parameter group and variant shown. Compare screw and connection drawings for the proposed assembly. Check thrust, extension and speed together; separate upper limits do not establish a usable operating point.
Parameters and where they apply
| L01 Condition pending verification · Current technical model | {"L1": {"add_mm": 85, "source_variable": "Scalable length"}, "L2": {"add_mm": 196, "source_variable": "Scalable length"}} |
|---|---|
| L03 Condition pending verification · Current technical model | {"L1": {"add_mm": 85, "source_variable": "Scalable length"}, "L2": {"add_mm": 196, "source_variable": "Scalable length"}} |
| L04 Condition pending verification · Current technical model | {"L1": {"add_mm": 85, "source_variable": "Scalable length"}, "L2": {"add_mm": 196, "source_variable": "Scalable length"}} |
| L06 Condition pending verification · Current technical model | {"L1": {"add_mm": 100, "source_variable": "Scalable length"}, "L2": {"add_mm": 245, "source_variable": "Scalable length"}} |
| L07 Condition pending verification · Current technical model | {"L1": {"add_mm": 100, "source_variable": "Scalable length"}, "L2": {"add_mm": 196, "source_variable": "Scalable length"}} |
| Ball diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Ball diameter | 3.175mm mm |
| Ball diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Ball diameter | 2.778mm mm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Ball screw rigidity | 32Kgf/μm Kgf/μm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Ball screw rigidity | 26Kgf/μm Kgf/μm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Ball screw rigidity | 14Kgf/μm Kgf/μm |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 30 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: C | 30 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: C | — |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Ca (KN) | 13.5 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Ca (KN) | 10.8 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Ca (KN) | 5.4 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1620-1.8; Source column: Ca (KN) | 5.4 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Coa (KN) | 29.9 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Coa (KN) | 23.5 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Coa (KN) | 11.1 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1620-1.8; Source column: Coa (KN) | 11.4 KN |
| Cor (KN) Current technical model · Bearing parameters:; Source row: Deep groove ball 6301-ZZ; Source column: Cor (KN) | 4.2 KN |
| Cr (KN) Current technical model · Bearing parameters:; Source row: Deep groove ball 6301-ZZ; Source column: Cr (KN) | 9.7 KN |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 50 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: D | 20 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: D | 95 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: D | 61 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: D | 95 |
| Diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Diameter | 16 mm mm |
| Driven gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 5M15T29 T |
| Driving gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 5M15T29 T |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: E | 3 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 11 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: F | — |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: F | 16 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: F | 21 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: F | 16 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: G | 32 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: H | 32 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: H | 32 |
| internal diameter Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: internal diameter | φ50 mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Lead of ball screw | 05mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Lead of ball screw | 10mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Lead of ball screw | 16mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1620-1.8; Source column: Lead of ball screw | 20mm mm |
| Limit switch Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: | Magnetic switch |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M20x1.5 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: M | M16 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: M | — |
| Maximum allowed speed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: | ≤500 mm/s mm/s |
| Maximum thrust allowed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: Maximum thrust allowed | ≤2.7KN KN |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 60A |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 57B |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 36 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of active gear teeth | 24 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of active gear teeth | 24 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 36 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of driven wheel teeth | 36 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of driven wheel teeth | 48 |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | NO |
| Rotation angle of piston rod Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: Maximum allowed speed Rotation angle of piston rod Limit switch | ±0.3° ° |
| Scalable length Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: Scalable length | ≤800 mm mm |
| Screw shaft Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Screw shaft | 10K3 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1.5:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 2:1 |
| Type Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Type | Ball screw |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦA | Φ50 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦB | Φ35 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦC | Φ16 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦC | Φ16 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦC | Φ16 |
Basic parameters
| Outer diameter | internal diameter | Maximum thrust allowed | Scalable length | Maximum allowed speed Rotation angle of piston rod Limit switch | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61x61mm mm | φ50 mm | ≤2.7KN KN | ≤800 mm | ≤500 mm/s | ±0.3° ° | Magnetic switch | |||||||||||||||||||||||
Source-listed options
| Lead of ball screw | Synchronous wheel speed ratio (input: output) | Motor specifications that can be directly installed | Reducers that can be matched | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 05mm mm | 1:1 | 1.5:1 | 2:1 | 60A | 57B | NO | ||||||||||||
| 10mm mm | ||||||||||||||||||
| 16mm mm | ||||||||||||||||||
| 20mm mm | ||||||||||||||||||
Ball-screw parameters
| Ball screw model | Type | Diameter | Lead of ball screw | Ca (KN) | Coa (KN) | Ball screw rigidity | Ball diameter | Screw shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFNU1605-4 | Ball screw | 16 mm | 05mm mm | 13.5 KN | 29.9 KN | 32Kgf/μm Kgf/μm | 3.175mm mm | 10K3 | |||||||||||||
| SFNU1610-3 | 10mm mm | 10.8 KN | 23.5 KN | 26Kgf/μm Kgf/μm | |||||||||||||||||
| SFA1616-1.8 | 16mm mm | 5.4 KN | 11.1 KN | 14Kgf/μm Kgf/μm | 2.778mm mm | ||||||||||||||||
| SFA1620-1.8 | 20mm mm | 5.4 KN | 11.4 KN | ||||||||||||||||||
Bearing parameters
| Bearing model | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Deep groove ball 6301-ZZ | 9.7 KN | 4.2 KN | |||
Timing pulleys and belt
| Synchronous wheel speed ratio | Driving gear specifications | Driven gear specifications | Number of active gear teeth | Number of driven wheel teeth | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 5M15T29 T | 5M15T29 T | 36 | 36 | |||||||
| 1.5:1 | 24 | 36 | |||||||||
| 2:1 | 24 | 48 | |||||||||
Dimension correspondence table (mm)
| Load connection type | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | Φ50 | Φ35 | — | 30 | 50 | 3 | 11 | — | 33 | M20x1.5 | ||||||||||||||
| Internal thread | Φ50 | Φ35 | — | 30 | 20 | 3 | — | — | 33 | M16 | ||||||||||||||
| Type I connector | Φ50 | Φ35 | Φ16 | — | 95 | 3 | 16 | 32 | 33 | — | ||||||||||||||
| Fisheye bearing | Φ50 | Φ35 | Φ16 | — | 61 | 3 | 21 | — | 33 | — | ||||||||||||||
| Y-joint | Φ50 | Φ35 | Φ16 | — | 95 | 3 | 16 | 32 | 32 | — | ||||||||||||||
Talk to HTROBOT
- Linear Actuator EDA60-L04-B10-C250-D010 ↗
Corresponding Alibaba product · EDA60
More Alibaba links (4)
- Miniature Pneumatic Cylinder Motor Servo Electric Actuator Valve Underfloor Linear IP65 12v 24v Electric High Speed ↗
Alibaba product containing EDA60
- 2024 Customized All Size Stroke Servo Linear Actuator Cylinder in China 10 Aluminum Press Machine Durable Provided Standard Pull ↗
Alibaba series product · EDA60
- High Speed Electric Servo Linear Actuator for Industrial Automation ↗
Alibaba series product · EDA60
- High Thrust Electric Servo Linear Actuator Cylinder 220V Industrial Use 10 Aluminum Press Machine Durable Provided Standard Pull ↗
Alibaba series product · EDA60
Confirm the configuration with the seller.
Series reference; confirm the current configuration with the seller.
- Emailemmy@htrobot.com
- Phone+86 152 0225 5004
- Alibaba storeVisit our Alibaba store