Electric cylinders · High-precision, high-load servo electric cylinder with customizable stroke
EDA60ZHigh-precision, high-load servo electric cylinder with customizable stroke · EDA60Z
EDA60Z belongs to High-precision, high-load servo electric cylinder with customizable stroke in the Electric cylinders catalog.
EDA60Z · Electric cylinders and linear actuators
An electric cylinder supplies a guided extension motion. Prepare the required thrust, stroke, speed, working cycle and load connection as one assembly requirement.
Comparing EDA60Z
For EDA60Z, read Accuracy Positioning | accuracy level, Ball diameter, Ball screw rigidity by the parameter group and variant shown. Compare screw and connection drawings for the proposed assembly. Check thrust, extension and speed together; separate upper limits do not establish a usable operating point.
Parameters and where they apply
| Accuracy Positioning | accuracy level Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Accuracy Positioning | accuracy level Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Ball diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Ball diameter | 3.175mm mm |
| Ball diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Ball diameter | 2.778mm mm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Ball screw rigidity | 32Kgf/μm Kgf/μm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Ball screw rigidity | 26Kgf/μm Kgf/μm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Ball screw rigidity | 14Kgf/μm Kgf/μm |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 30 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: C | 30 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: C | — |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Ca (KN) | 13.5 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Ca (KN) | 10.8 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Ca (KN) | 5.4 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1620-1.8; Source column: Ca (KN) | 5.4 KN |
| Center distance of synchronous wheel Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 85mm mm |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Coa (KN) | 29.9 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Coa (KN) | 23.5 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Coa (KN) | 11.1 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1620-1.8; Source column: Coa (KN) | 11.4 KN |
| Cor (KN) Current technical model · Bearing parameters:; Source row: Deep groove ball 6004-ZZ; Source column: Cor (KN) | 5.03 KN |
| Cor (KN) Current technical model · Bearing parameters:; Source row: Thrust ball b earing 51105; Source column: Cor (KN) | 37 KN |
| Cr (KN) Current technical model · Bearing parameters:; Source row: Deep groove ball 6004-ZZ; Source column: Cr (KN) | 9.38 KN |
| Cr (KN) Current technical model · Bearing parameters:; Source row: Thrust ball b earing 51105; Source column: Cr (KN) | 19.6 KN |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 50 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: D | 20 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: D | 95 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: D | 61 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: D | 95 |
| Diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Diameter | 16 mm mm |
| Driven gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 5M20T30 T |
| Driving gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 5M20T34 T |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: E | 3 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 11 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: F | — |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: F | 16 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: F | 21 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: F | 16 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: G | 33 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: G | 32 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: H | 32 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: H | 32 |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Lead of ball screw | 05mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1610-3; Source column: Lead of ball screw | 10mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1616-1.8; Source column: Lead of ball screw | 16mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA1620-1.8; Source column: Lead of ball screw | 20mm mm |
| Limit switch Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: | Magnetic switch |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M20x1.5 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: M | M16 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: M | — |
| Maximum allowed speed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: | ≤500 mm/s mm/s |
| Maximum thrust allowed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: Maximum thrust allowed | ≤5KN KN |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 80A |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 86B |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 36 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of active gear teeth | 24 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of active gear teeth | 24 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 36 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of driven wheel teeth | 36 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of driven wheel teeth | 48 |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | 60A |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | 60A 80A |
| Rotation angle of piston rod Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: Maximum allowed speed Rotation angle of piston rod Limit switch | ±0.3° ° |
| Scalable length Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: Scalable length | ≤800 mm mm |
| Screw shaft Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Screw shaft | 14K5 |
| Slenderness ratio Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Slenderness ratio | 1:30 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 350 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Synchronous belt circumference | 320 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Synchronous belt circumference | 355 |
| Synchronous belt width Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 20mm mm |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1.5:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 2:1 |
| Type Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU1605-4; Source column: Type | Ball screw |
| internal diameter Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 61x61mm; Source column: internal diameter | φ50 mm mm |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦA | Φ50 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦA | Φ50 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦB | Φ35 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦB | Φ35 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦC | Φ16 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦC | Φ16 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦC | Φ16 |
Basic parameters
| Outer diameter | internal diameter | Maximum thrust allowed | Scalable length | Maximum allowed speed Rotation angle of piston rod Limit switch | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61x61mm mm | φ50 mm | ≤5KN KN | ≤800 mm | ≤500 mm/s | ±0.3° ° | Magnetic switch | |||||||||||||||||||||
Source-listed options
| Lead of ball screw | Synchronous wheel speed ratio (input: output) | Motor specifications that can be directly installed | Reducers that can be matched | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 05mm mm | 1:1 | 1.5:1 | 2:1 | 80A | 86B | 60A | 60A 80A | ||||||
| 10mm mm | |||||||||||||
| 16mm mm | |||||||||||||
| 20mm mm | |||||||||||||
Ball-screw parameters
| Ball screw model | Type | Diameter | Lead of ball screw | Ca (KN) | Coa (KN) | Ball screw rigidity | Ball diameter | Screw shaft | Slenderness ratio | Accuracy Positioning | accuracy level | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFNU1605-4 | Ball screw | 16 mm | 05mm mm | 13.5 KN | 29.9 KN | 32Kgf/μm Kgf/μm | 3.175mm mm | 14K5 | 1:30 | C5/±0.01 | C7/±0.02 | ||||||||||||||||
| SFNU1610-3 | 10mm mm | 10.8 KN | 23.5 KN | 26Kgf/μm Kgf/μm | |||||||||||||||||||||||
| SFA1616-1.8 | 16mm mm | 5.4 KN | 11.1 KN | 14Kgf/μm Kgf/μm | 2.778mm mm | ||||||||||||||||||||||
| SFA1620-1.8 | 20mm mm | 5.4 KN | 11.4 KN | ||||||||||||||||||||||||
Bearing parameters
| Bearing model | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Deep groove ball 6004-ZZ | 9.38 KN | 5.03 KN | |||
| Thrust ball b earing 51105 | 19.6 KN | 37 KN | |||
Timing pulleys and belt
| Synchronous wheel speed ratio | Driving gear specifications | Driven gear specifications | Number of active gear teeth | Number of driven wheel teeth | Center distance of synchronous wheel | Synchronous belt circumference | Synchronous belt width | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 5M20T34 T | 5M20T30 T | 36 | 36 | 85mm mm | 350 | 20mm mm | ||||||||||
| 1.5:1 | 24 | 36 | 320 | ||||||||||||||
| 2:1 | 24 | 48 | 355 | ||||||||||||||
Dimension correspondence table (mm)
| Load connection type | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | Φ50 | Φ35 | — | 30 | 50 | 3 | 11 | — | 33 | M20x1.5 | |||||||||||||
| Internal thread | Φ50 | Φ35 | — | 30 | 20 | 3 | — | — | 33 | M16 | |||||||||||||
| Type I connector | Φ50 | Φ35 | Φ16 | — | 95 | 3 | 16 | 32 | 33 | — | |||||||||||||
| Fisheye bearing | Φ50 | Φ35 | Φ16 | — | 61 | 3 | 21 | — | 33 | — | |||||||||||||
| Y-joint | Φ50 | Φ35 | Φ16 | — | 95 | 3 | 16 | 32 | 32 | — | |||||||||||||
Talk to HTROBOT
- Emailemmy@htrobot.com
- Phone+86 152 0225 5004
- Alibaba storeVisit our Alibaba store