Electric cylinders · High-precision, high-load servo electric cylinder with customizable stroke
EDA75High-precision, high-load servo electric cylinder with customizable stroke · EDA75
EDA75 belongs to High-precision, high-load servo electric cylinder with customizable stroke in the Electric cylinders catalog.
Match EDA75 to the motion requirement
The EDA75 material includes cylinder dimensions, thrust and extension limits, ball-screw data and load-connection forms. Provide the stroke, thrust, speed, working cycle and installation envelope together when requesting a cylinder proposal.
Check the source conditions
Read the ball-screw stroke condition beside its values. The thrust and extension entries are separate source upper limits; confirm their applicability together on the proposed assembly. Connection drawings and dimensional expressions belong to their own mounting form.
Continue comparing
Parameters and where they apply
| Accuracy Positioning | accuracy level Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Accuracy Positioning | accuracy level Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Ball diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Ball diameter | 3.175mm mm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Ball screw rigidity | 39Kgf/μm Kgf/μm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2010-3.8; Source column: Ball screw rigidity | 40Kgf/μm Kgf/μm |
| Ball screw rigidity Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2020-1.8; Source column: Ball screw rigidity | 19Kgf/μm Kgf/μm |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 40 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: C | 40 |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: C | — |
| C Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: C | — |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Ca (KN) | 15.2 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2010-3.8; Source column: Ca (KN) | 14.8 KN |
| Ca (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2020-1.8; Source column: Ca (KN) | 7.4 KN |
| Center distance of synchronous wheel Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 85mm mm |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Coa (KN) | 38 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2010-3.8; Source column: Coa (KN) | 38 KN |
| Coa (KN) Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2020-1.8; Source column: Coa (KN) | 17.2 KN |
| Cor (KN) Current technical model · Bearing parameters:; Source row: Tapered roller bearing 30302x2; Source column: Cor (KN) | 21.1 KN |
| Cr (KN) Current technical model · Bearing parameters:; Source row: Tapered roller bearing 30302x2; Source column: Cr (KN) | 23.6 KN |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 65 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: D | 25 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: D | 118 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: D | 72 |
| D Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: D | 118 |
| Diameter Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Diameter | 20 mm mm |
| Driven gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 5M15T29 T |
| Driving gear specifications Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 5M15T29 T |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: E | 3 |
| E Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: E | 3 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 12 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: F | — |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: F | 20 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: F | 25 |
| F Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: F | 20 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | 41 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: G | 41 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: G | 41 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: G | 41 |
| G Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: G | 44.4 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: H | 40 |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: H | — |
| H Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: H | 40 |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Lead of ball screw | 05mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2010-3.8; Source column: Lead of ball screw | 10mm mm |
| Lead of ball screw Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFA2020-1.8; Source column: Lead of ball screw | 20mm mm |
| Limit switch Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 75x75 mm; Source column: | Magnetic switch |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M30x1.5 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: M | M20 |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: M | — |
| M Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: M | — |
| Maximum allowed speed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 75x75 mm; Source column: | ≤500 mm/s mm/s |
| Maximum thrust allowed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 75x75 mm; Source column: Maximum thrust allowed | ≤6.8KN KN |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 60A |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 80A |
| Motor specifications that can be directly installed Current technical model · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 86B |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 36 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of active gear teeth | 24 |
| Number of active gear teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of active gear teeth | 24 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 36 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of driven wheel teeth | 36 |
| Number of driven wheel teeth Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of driven wheel teeth | 48 |
| Reducers that can be matched Current technical model · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | NO |
| Rotation angle of piston rod Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 75x75 mm; Source column: Maximum allowed speed Rotation angle of piston rod Limit switch | ±0.3° ° |
| Scalable length Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 75x75 mm; Source column: Scalable length | ≤600 mm mm |
| Screw shaft Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Screw shaft | 12K4 |
| Slenderness ratio Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Slenderness ratio | 1:30 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 350 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Synchronous belt circumference | 320 |
| Synchronous belt circumference Current technical model · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Synchronous belt circumference | 355 |
| Synchronous belt width Current technical model · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 15mm mm |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1.5:1 |
| Synchronous wheel speed ratio (input: output) Current technical model · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 2:1 |
| Type Source condition; not yet structured · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Current technical model · Ball screw parameters; Source row: SFNU2005-4; Source column: Type | Ball screw |
| internal diameter Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model · Basic parameters:; Source row: 75x75 mm; Source column: internal diameter | φ63 mm mm |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | Φ60 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦA | Φ60 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦA | Φ60 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦA | Φ60 |
| ΦA Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦA | Φ60 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ45 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦB | Φ45 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦB | Φ45 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦB | Φ45 |
| ΦB Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦB | Φ45 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦC | — |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦC | Φ20 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦC | Φ20 |
| ΦC Current technical model · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦC | Φ20 |
Basic parameters
| Outer diameter | internal diameter | Maximum thrust allowed | Scalable length | Maximum allowed speed Rotation angle of piston rod Limit switch | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 75x75 mm | φ63 mm | ≤6.8KN KN | ≤600 mm | ≤500 mm/s | ±0.3° ° | Magnetic switch | |||||||||||||||||||||
Source-listed options
| Lead of ball screw | Synchronous wheel speed ratio (input: output) | Motor specifications that can be directly installed | Reducers that can be matched | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 05mm mm | 1:1 | 1.5:1 | 2:1 | 60A | 80A | 86B | NO | ||||||
| 10mm mm | |||||||||||||
| 20mm mm | |||||||||||||
Ball-screw parameters
| Ball screw model | Type | Diameter | Lead of ball screw | Ca (KN) | Coa (KN) | Ball screw rigidity | Ball diameter | Screw shaft | Slenderness ratio | Accuracy Positioning | accuracy level | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFNU2005-4 | Ball screw | 20 mm | 05mm mm | 15.2 KN | 38 KN | 39Kgf/μm Kgf/μm | 3.175mm mm | 12K4 | 1:30 | C5/±0.01 | C7/±0.02 | ||||||||||||||||
| SFA2010-3.8 | 10mm mm | 14.8 KN | 38 KN | 40Kgf/μm Kgf/μm | |||||||||||||||||||||||
| SFA2020-1.8 | 20mm mm | 7.4 KN | 17.2 KN | 19Kgf/μm Kgf/μm | |||||||||||||||||||||||
Bearing parameters
| Bearing model | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Tapered roller bearing 30302x2 | 23.6 KN | 21.1 KN | |||
Timing pulleys and belt
| Synchronous wheel speed ratio | Driving gear specifications | Driven gear specifications | Number of active gear teeth | Number of driven wheel teeth | Center distance of synchronous wheel | Synchronous belt circumference | Synchronous belt width | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 5M15T29 T | 5M15T29 T | 36 | 36 | 85mm mm | 350 | 15mm mm | ||||||||||
| 1.5:1 | 24 | 36 | 320 | ||||||||||||||
| 2:1 | 24 | 48 | 355 | ||||||||||||||
Dimension correspondence table (mm)
| Load connection type | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | Φ60 | Φ45 | — | 40 | 65 | 3 | 12 | — | 41 | M30x1.5 | ||||||||||||
| Internal thread | Φ60 | Φ45 | — | 40 | 25 | 3 | — | — | 41 | M20 | ||||||||||||
| Type I connector | Φ60 | Φ45 | Φ20 | — | 118 | 3 | 20 | 40 | 41 | — | ||||||||||||
| Fisheye bearing | Φ60 | Φ45 | Φ20 | — | 72 | 3 | 25 | — | 41 | — | ||||||||||||
| Y-joint | Φ60 | Φ45 | Φ20 | — | 118 | 3 | 20 | 40 | 44.4 | — | ||||||||||||
Talk to HTROBOT
- High Speed Electric Servo Linear Actuator for Industrial Automation ↗
Alibaba product containing EDA75
More Alibaba links (4)
- High Thrust Electric Servo Linear Actuator Cylinder 220V Industrial Use 10 Aluminum Press Machine Durable Provided Standard Pull ↗
Alibaba product containing EDA75
- Low Noise Linear Type Turnback Type High Precision Electric Linear Actuator Servo Electric Cylinder Actuators EDA75 800mm 800KG ↗
Alibaba product containing EDA75
- 2024 Customized All Size Stroke Servo Linear Actuator Cylinder in China 10 Aluminum Press Machine Durable Provided Standard Pull ↗
Alibaba series product · EDA75
- Miniature Pneumatic Cylinder Motor Servo Electric Actuator Valve Underfloor Linear IP65 12v 24v Electric High Speed ↗
Alibaba series product · EDA75
Confirm the configuration with the seller.
Series reference; confirm the current configuration with the seller.
- Emailemmy@htrobot.com
- Phone+86 152 0225 5004
- Alibaba storeVisit our Alibaba store