Silinder elektrik · Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan EDA80
EDA80Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan EDA80
EDA80 tergolong dalam Silinder elektrik servo berketepatan tinggi untuk beban berat dengan lejang boleh disesuaikan EDA80 di katalog Silinder elektrik.
EDA80 · Silinder elektrik dan penggerak linear
Silinder menyediakan pemanjangan berpandu. Tetapkan daya tujahan, lejang, kelajuan, kitaran dan sambungan beban sebagai satu keperluan pemasangan.
Membandingkan EDA80
Untuk EDA80, baca Ketepatan kedudukan | tahap ketepatan, Diameter bebola, Kekakuan skru bebola mengikut kumpulan parameter dan varian yang ditunjukkan. Bandingkan lukisan skru dan sambungan. Semak daya, pemanjangan dan kelajuan bersama; had berasingan tidak menetapkan titik operasi.
Parameter dan kebolehgunaannya
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Accuracy Positioning | accuracy level | C5/±0.01 |
|---|---|
| Ketepatan kedudukan | tahap ketepatan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Accuracy Positioning | accuracy level | C7/±0.02 |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Ball diameter | 3.175mm mm |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2510-4; Source column: Ball diameter | 4.762mm mm |
| Diameter bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA2525-1.8; Source column: Ball diameter | 3.175mm mm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Ball screw rigidity | 45Kgf/μm Kgf/μm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2510-4; Source column: Ball screw rigidity | 50Kgf/μm Kgf/μm |
| Kekakuan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA2525-1.8; Source column: Ball screw rigidity | 22Kgf/μm Kgf/μm |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: C | 40 |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: C | 40 |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: C | — |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: C | — |
| C Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: C | — |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Ca (KN) | 16.9 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2510-4; Source column: Ca (KN) | 28.9 KN |
| Ca (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA2525-1.8; Source column: Ca (KN) | 8.2 KN |
| Jarak pusat roda segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Center distance of synchronous wheel | 110mm mm |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Coa (KN) | 48 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2510-4; Source column: Coa (KN) | 71.5 KN |
| Coa (KN) Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA2525-1.8; Source column: Coa (KN) | 21.5 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Deep groove ball 6206-ZZ x2; Source column: Cor (KN) | 11.3 KN |
| Cor (KN) Model teknikal semasa · Bearing parameters:; Source row: Flat thrust bearing 51206; Source column: Cor (KN) | 58 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Deep groove ball 6206-ZZ x2; Source column: Cr (KN) | 19.5 KN |
| Cr (KN) Model teknikal semasa · Bearing parameters:; Source row: Flat thrust bearing 51206; Source column: Cr (KN) | 29.3 KN |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: D | 65 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: D | 25 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: D | 150 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: D | 80 |
| D Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: D | 150 |
| Diameter Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Diameter | 25 mm mm |
| Spesifikasi gear dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driven gear specifications | 5M25T42 T |
| Spesifikasi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Driving gear specifications | 5M25T42 T |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: E | 3 |
| E Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: E | 3 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: F | 12 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: F | — |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: F | 30 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: F | 31 |
| F Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: F | 35 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: G | 46 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: G | 46 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: G | 46 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: G | 46 |
| G Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: G | 70 |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: H | 51 |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: H | — |
| H Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: H | 73 |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Lead of ball screw | 05mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2510-4; Source column: Lead of ball screw | 10mm mm |
| Jarak pendahuluan skru bebola Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFA2525-1.8; Source column: Lead of ball screw | 25mm mm |
| Suis had Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 80x80 mm; Source column: | Magnetic switch |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: M | M30x1.5 |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: M | M20 |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: M | — |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: M | — |
| M Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: M | — |
| Kelajuan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 80x80 mm; Source column: | ≤1000 mm/s mm/s |
| Daya tujahan maksimum yang dibenarkan Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 80x80 mm; Source column: Maximum thrust allowed | ≤20KN KN |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 80A |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 100A |
| Spesifikasi motor yang boleh dipasang terus Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Motor specifications that can be directly installed | 130A |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of active gear teeth | 40 |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of active gear teeth | 30 |
| Bilangan gigi gear pemacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of active gear teeth | 30 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Number of driven wheel teeth | 40 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Number of driven wheel teeth | 45 |
| Bilangan gigi roda dipacu Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Number of driven wheel teeth | 60 |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | 60A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Reducers that can be matched | 60A、80A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 10mm; Source column: Reducers that can be matched | 90A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 10mm; Source column: Reducers that can be matched | 60A、80A、100A、130A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 25mm; Source column: Reducers that can be matched | 115A |
| Reducer yang boleh dipadankan Model teknikal semasa · Optional configuration:; Source row: 25mm; Source column: Reducers that can be matched | 80 A 、 100A 、130A、180A |
| Sudut putaran rod omboh Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 80x80 mm; Source column: Maximum allowed speed Rotation angle of piston rod Limit switch | ±0.3° ° |
| Scalable length Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 80x80 mm; Source column: Scalable length | ≤750 mm mm |
| Aci skru Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Screw shaft | 22K6 |
| Nisbah kelangsingan Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Slenderness ratio | 1:30 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt circumference | 420 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1.5:1; Source column: Synchronous belt circumference | 410 |
| Lilitan tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 2:1; Source column: Synchronous belt circumference | 450 |
| Lebar tali sawat segerak Model teknikal semasa · Synchronous wheel and synchronous belt:; Source row: 1:1; Source column: Synchronous belt width | 25mm mm |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 1.5:1 |
| Nisbah kelajuan roda segerak (input: output) Model teknikal semasa · Optional configuration:; Source row: 05mm; Source column: Synchronous wheel speed ratio (input: output) | 2:1 |
| Jenis Keadaan sumber; belum distrukturkan · (Note: The parameters of the ball screw are applicable to strokes ≤ 300mm. For strokes greater than 300mm, please consult our technical personnel.) · Model teknikal semasa · Ball screw parameters; Source row: SFNU2505-4; Source column: Type | Ball screw |
| Diameter dalaman Keadaan sumber; belum distrukturkan · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Model teknikal semasa · Basic parameters:; Source row: 80x80 mm; Source column: internal diameter | φ65 mm mm |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦA | Φ65 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦA | Φ65 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦA | Φ65 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦA | Φ65 |
| ΦA Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦA | Φ65 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦB | Φ50 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦB | Φ50 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦB | Φ50 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦB | Φ50 |
| ΦB Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦB | Φ50 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: External thread; Source column: ΦC | — |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Internal thread; Source column: ΦC | — |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Type I connector; Source column: ΦC | Φ30 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Fisheye bearing; Source column: ΦC | Φ25 |
| ΦC Model teknikal semasa · Size Correspondence Table (Unit: mm); Source row: Y-joint; Source column: ΦC | Φ30 |
Parameter asas
| Diameter luar | Diameter dalaman | Daya tujahan maksimum yang dibenarkan | Scalable length | Maximum allowed speed Rotation angle of piston rod Limit switch | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 80x80 mm | φ65 mm | ≤20KN KN | ≤750 mm | ≤1000 mm/s | ±0.3° ° | Magnetic switch | ||||||||||||||||||||||
Pilihan yang disenaraikan dalam sumber
| Jarak pendahuluan skru bebola | Nisbah kelajuan roda segerak (input: output) | Spesifikasi motor yang boleh dipasang terus | Reducer yang boleh dipadankan | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 05mm mm | 1:1 | 1.5:1 | 2:1 | 80A | 100A | 130A | 60A | 60A、80A | |||||||||
| 10mm mm | 90A | 60A、80A、100A、130A | |||||||||||||||
| 25mm mm | 115A | 80 A 、 100A 、130A、180A | |||||||||||||||
Parameter skru bebola
| Model skru bebola | Jenis | Diameter | Jarak pendahuluan skru bebola | Ca (KN) | Coa (KN) | Kekakuan skru bebola | Diameter bebola | Aci skru | Nisbah kelangsingan | Ketepatan kedudukan | tahap ketepatan | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFNU2505-4 | Ball screw | 25 mm | 05mm mm | 16.9 KN | 48 KN | 45Kgf/μm Kgf/μm | 3.175mm mm | 22K6 | 1:30 | C5/±0.01 | C7/±0.02 | |||||||||||||||||
| SFNU2510-4 | 10mm mm | 28.9 KN | 71.5 KN | 50Kgf/μm Kgf/μm | 4.762mm mm | |||||||||||||||||||||||
| SFA2525-1.8 | 25mm mm | 8.2 KN | 21.5 KN | 22Kgf/μm Kgf/μm | 3.175mm mm | |||||||||||||||||||||||
Parameter galas
| Model galas | Cr (KN) | Cor (KN) | |||
|---|---|---|---|---|---|
| Deep groove ball 6206-ZZ x2 | 19.5 KN | 11.3 KN | |||
| Flat thrust bearing 51206 | 29.3 KN | 58 KN | |||
Takal pemasaan dan tali sawat
| Nisbah kelajuan roda segerak | Spesifikasi gear pemacu | Spesifikasi gear dipacu | Bilangan gigi gear pemacu | Bilangan gigi roda dipacu | Jarak pusat roda segerak | Lilitan tali sawat segerak | Lebar tali sawat segerak | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:1 | 5M25T42 T | 5M25T42 T | 40 | 40 | 110mm mm | 420 | 25mm mm | |||||||||||
| 1.5:1 | 30 | 45 | 410 | |||||||||||||||
| 2:1 | 30 | 60 | 450 | |||||||||||||||
Jadual padanan dimensi (mm)
| Jenis sambungan beban | ΦA | ΦB | ΦC | C | D | E | F | H | G | M | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External thread | Φ65 | Φ50 | — | 40 | 65 | 3 | 12 | — | 46 | M30x1.5 | ||||||||||||||
| Internal thread | Φ65 | Φ50 | — | 40 | 25 | 3 | — | — | 46 | M20 | ||||||||||||||
| Type I connector | Φ65 | Φ50 | Φ30 | — | 150 | 3 | 30 | 51 | 46 | — | ||||||||||||||
| Fisheye bearing | Φ65 | Φ50 | Φ25 | — | 80 | 3 | 31 | — | 46 | — | ||||||||||||||
| Y-joint | Φ65 | Φ50 | Φ30 | — | 150 | 3 | 35 | 73 | 70 | — | ||||||||||||||
Bercakap dengan HTROBOT
- Miniature Pneumatic Cylinder Motor Servo Electric Actuator Valve Underfloor Linear IP65 12v 24v Electric High Speed ↗
Produk siri Alibaba · EDA80
Rujukan siri; sahkan konfigurasi semasa dengan penjual.
- E-melemmy@htrobot.com
- Telefon+86 152 0225 5004
- Kedai AlibabaLawati kedai Alibaba kami