← Back to High-precision, high-load servo electric cylinder with customizable stroke

Model reference EDF90 source product illustration Open full-resolution source image

Electric cylinders · High-precision, high-load servo electric cylinder with customizable stroke EDF94

EDF90High-precision, high-load servo electric cylinder with customizable stroke EDF94

EDF90 belongs to High-precision, high-load servo electric cylinder with customizable stroke EDF94 in the Electric cylinders catalog.

Series: High-precision, high-load servo electric cylinder with customizable stroke EDF94
Configurations: None listed; specify yours in the inquiry

Parameters Inquiry draft

EDF90 · Electric cylinders and linear actuators

An electric cylinder supplies a guided extension motion. Prepare the required thrust, stroke, speed, working cycle and load connection as one assembly requirement.

Comparing EDF90

For EDF90, compare these listed entries: Maximum thrust allowed: ≤100KG；Extendable length: ≤1800mm. Both are source upper limits; do not assume they can be reached together. Check the actual configuration. Compare screw and connection drawings for the proposed assembly. Check thrust, extension and speed together; separate upper limits do not establish a usable operating point.

Parameters and where they apply

Outer diameter Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model	Φ90 mm mm
Maximum thrust allowed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model	≤100KG KG
Extendable length Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model	≤1800mm mm
Maximum allowed speed Source condition; not yet structured · (Note: Thrust, stroke, and speed should be combined with actual usage, and the upper limit values of the three cannot be used together.) · Current technical model	≤50 mm/s mm/s

Basic parameters

Outer diameter		internal diameter				Maximum thrust allowed							Scalable length				Maximum allowed speed Rotation angle of piston rod					Limit switch
Φ90 mm		φ50mm mm				≤100KG KG							≤1800mm mm				≤50 mm/s			±0.3° °		NO

Source-listed options

Lead of ball screw	Synchronous wheel speed ratio (input: output)			Motor speciﬁcations that can be directly installed	Reducers that can be matched
08mm mm	1:1	/	/	NO	60A	60A、80A
12mm mm
20mm mm

Ball-screw parameters

Ball screw model	Type	Diameter	Lead of ball screw	Ca (KN)	Coa (KN)	Ball screw rigidity	Ball diameter	Screw shaft	Slenderness ratio	Accuracy Positioning \| accuracy level
/	Trapezoidal thread rod	Multiple speciﬁcations	08mm mm	/ KN	/ KN	/	/	75K20	/	C10/±0.5
/			12mm mm	/ KN	/ KN	/	/
/			20mm mm	/ KN	/ KN	/	/

Output and speed

Motor power			400W (60A) W		750W(80A) W
Rated speed			3000 rpm		3000 rpm
Rated torque			1.27 N.M		2.39 N.M
Reduction ratio		Lead of ball screw (mm) mm	Rated thrust (KN) KN	Rated speed (mm/s) mm/s	Rated thrust (KN) KN	Rated speed (mm/s) mm/s
Synchronous wheel speed ratio	1	08	0.2	30	0.37	30
		12	0.13	30	0.25	30
		20	0.08	30	0.15	30
planetary reducer speed ratio	5	08	1	30	-	-
		12	0.67	30	1.25	30
		20	0.4	30	0.75	30
	10	08	-	-	-	-
		12	1.33	30	-	-
		20	0.8	30	-	-

Dimension correspondence table (mm)

Scalable length（mm） mm		500 mm		600 mm	800 mm	1000 mm	1200 mm	1350 mm	1500 mm			1650 mm	1800 mm
Initial length【L】（mm） mm		464 mm		499 mm	559 mm	629 mm	699 mm	749 mm	799 mm			849 mm	884 mm

Talk to HTROBOT

Open inquiry draft →