Módulos lineales · HTML Mesa de trabajo para cargas pesadas
TML180HTML180 Mesa de trabajo para cargas pesadas
TML180 pertenece a HTML Mesa de trabajo para cargas pesadas en el catálogo Módulos lineales.
TML180 · Módulos y mesas lineales
Para un eje de posicionamiento, defina recorrido útil, carga móvil, orientación y precisión requerida. Compare accionamiento y montaje antes de elegir.
Comparar TML180
Para TML180, compare estos datos: Diámetro exterior del tornillo: 20 mm；Rango de carrera: 10-1200 mm. Use dimensiones y datos de movimiento del modelo exacto. Compare carga, velocidad y posicionamiento con sus condiciones.
Parámetros y su aplicabilidad
| Momento en voladizo admisible MP Modelo técnico actual | 810 Nm |
|---|---|
| Momento en voladizo admisible MR Modelo técnico actual | 520 Nm |
| Momento en voladizo admisible MY Modelo técnico actual | 810 Nm |
| Carga horizontal = · 5 · 5 · Modelo técnico actual | 150 kg |
| Carga horizontal = · 40 · 40 · Modelo técnico actual | 50 kg |
| Carga horizontal = · 10 · 10 · Modelo técnico actual | 100 kg |
| Carga horizontal = · 20 · 20 · Modelo técnico actual | 80 kg |
| Carga vertical = · 40 · 40 · Modelo técnico actual | 35 kg |
| Carga vertical = · 20 · 20 · Modelo técnico actual | 60 kg |
| Carga vertical = · 5 · 5 · Modelo técnico actual | 100 kg |
| Carga vertical = · 10 · 10 · Modelo técnico actual | 80 kg |
| Velocidad máxima = · 40 · 40 · Modelo técnico actual | 2000 |
| Velocidad máxima = · 5 · 5 · Modelo técnico actual | 250 |
| Velocidad máxima = · 20 · 20 · Modelo técnico actual | 1000 |
| Velocidad máxima = · 10 · 10 · Modelo técnico actual | 500 |
| Potencia del motor Modelo técnico actual · 与 catalog 12 '钢模组'表(180型 100W) 功率不一致，TML180 编码页为 750W，两处按原文录入 | 750 W |
| Diámetro exterior del tornillo Modelo técnico actual | 20 mm |
| Recorrido Modelo técnico actual | 10-1200 mm |
| Application reference 750 | The source describes steel workbenches for general or clean-room equipment, including CNC, machine-tool and transfer equipment. |
| Motor installation reference 750 | BD:direct installation; BL:outside,left; BR:outside,right; BM:outside,lower. |
| Operating condition 750 | Stroke over600mm may cause resonance; maximum operating speed requires source-table confirmation. No motorRPM condition is printed in this main table. |
| Ordering example (reference) 750 | TML180-L10-S150-BD-P750W-B |
| Allowable overhang reference 750 | The three orientation tables are allowable overhang distances in mm, not speed ratings. Lead50/25 reference rows are distinct from the main lead list on models whose main table does not print those leads. |
| Repeatability (as printed) 750 | +0.02/0.01 mm |
| Main table lead reference 750 | 5/10/20/40 mm |
| Source power difference 750 | Main table750W vs overview selection100W. |
Allowable overhang distances · horizontal · original p.90
| Printed lead/load | A(mm) | B(mm) | C(mm) |
|---|---|---|---|
| Lead50 · 5kg | 1940 mm | 1285 mm | 1264 mm |
| Lead50 · 10kg | 1490 mm | 1125 mm | 1120 mm |
| Lead50 · 15kg | 1210 mm | 1045 mm | 1048 mm |
| Lead25 · 5kg | 1938 mm | 1283 mm | 1260 mm |
| Lead25 · 10kg | 1488 mm | 1122 mm | 1117 mm |
| Lead25 · 22kg | 1235 mm | 1041 mm | 1045 mm |
| Lead10 · 15kg | 1392 mm | 1076 mm | 1079 mm |
| Lead10 · 25kg | 1182 mm | 1020 mm | 1025 mm |
| Lead10 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 50kg | 565 mm | 560 mm | 530 mm |
| Lead05 · - | - mm | - mm | - mm |
A/B/C distance directions correspond to the original installation diagrams, not0°/45°/90° and not speed. All source rows including dash row are retained.
The distance source printsLead50/Lead25 while this model main table lists other lead values; no lead mapping is inferred.
Allowable overhang distances · wall · original p.90
| Printed lead/load | A(mm) | B(mm) | C(mm) |
|---|---|---|---|
| Lead50 · 5kg | 1940 mm | 1285 mm | 1264 mm |
| Lead50 · 10kg | 1490 mm | 112b mm | 1120 mm |
| Lead50 · 15kg | 1210 mm | 1045 mm | 1048 mm |
| Lead25 · 5kg | 1938 mm | 1283 mm | 1260 mm |
| Lead25 · 10kg | 1488 mm | 1122 mm | 1117 mm |
| Lead25 · 22kg | 1235 mm | 1041 mm | 1045 mm |
| Lead10 · 15kg | 1392 mm | 1076 mm | 1079 mm |
| Lead10 · 25kg | 1182 mm | 1020 mm | 1025 mm |
| Lead10 · 30kg | 1111 mm | *6 mm | 750 mm |
| Lead05 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 50kg | 565 mm | 560 mm | 530 mm |
| Lead05 · - | - mm | - mm | - mm |
A/B/C distance directions correspond to the original installation diagrams, not0°/45°/90° and not speed. All source rows including dash row are retained.
The distance source printsLead50/Lead25 while this model main table lists other lead values; no lead mapping is inferred.
Two B cells have nonnumeric/unclear source text:10kg Lead50=112b,30kg Lead10=*6(native text). Intended numbers require source confirmation; neighboring tables are not substituted.
Allowable overhang distances · vertical · original p.90
| Printed lead/load | A(mm) | B(mm) | C(mm) |
|---|---|---|---|
| Lead50 · 5kg | 1940 mm | 1285 mm | 1264 mm |
| Lead50 · 10kg | 1490 mm | 1125 mm | 1120 mm |
| Lead50 · 15kg | 1210 mm | 1045 mm | 1048 mm |
| Lead25 · 5kg | 1938 mm | 1283 mm | 1260 mm |
| Lead25 · 10kg | 1488 mm | 1122 mm | 1117 mm |
| Lead25 · 22kg | 1235 mm | 1041 mm | 1045 mm |
| Lead10 · 15kg | 1392 mm | 1076 mm | 1079 mm |
| Lead10 · 25kg | 1182 mm | 1020 mm | 1025 mm |
| Lead10 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 50kg | 565 mm | 560 mm | 530 mm |
| Lead05 · - | - mm | - mm | - mm |
A/B/C distance directions correspond to the original installation diagrams, not0°/45°/90° and not speed. All source rows including dash row are retained.
The distance source printsLead50/Lead25 while this model main table lists other lead values; no lead mapping is inferred.
Hablar con HTROBOT
- Correo electrónicoemmy@htrobot.com
- Teléfono+86 152 0225 5004
- Tienda de AlibabaVisitar nuestra tienda de Alibaba