Módulos lineares · HTML Mesa de trabalho para cargas elevadas
TML180HTML180 Mesa de trabalho para cargas elevadas
TML180 pertence a HTML Mesa de trabalho para cargas elevadas no catálogo Módulos lineares.
TML180 · Módulos e mesas lineares
Defina curso útil, carga móvel, orientação e requisitos de posicionamento. Compare acionamento e montagem antes da escolha.
Comparar TML180
Para TML180, compare estes dados: Diâmetro externo do parafuso: 20 mm；Intervalo de curso: 10-1200 mm. Use dimensões e dados do modelo exato. Compare carga, velocidade e posicionamento com suas condições.
Parâmetros e sua aplicabilidade
| Momento de balanço admissível MP Modelo técnico atual | 810 Nm |
|---|---|
| Momento de balanço admissível MR Modelo técnico atual | 520 Nm |
| Momento de balanço admissível MY Modelo técnico atual | 810 Nm |
| Carga horizontal = · 5 · 5 · Modelo técnico atual | 150 kg |
| Carga horizontal = · 40 · 40 · Modelo técnico atual | 50 kg |
| Carga horizontal = · 10 · 10 · Modelo técnico atual | 100 kg |
| Carga horizontal = · 20 · 20 · Modelo técnico atual | 80 kg |
| Carga vertical = · 40 · 40 · Modelo técnico atual | 35 kg |
| Carga vertical = · 20 · 20 · Modelo técnico atual | 60 kg |
| Carga vertical = · 5 · 5 · Modelo técnico atual | 100 kg |
| Carga vertical = · 10 · 10 · Modelo técnico atual | 80 kg |
| Velocidade máxima = · 40 · 40 · Modelo técnico atual | 2000 |
| Velocidade máxima = · 5 · 5 · Modelo técnico atual | 250 |
| Velocidade máxima = · 20 · 20 · Modelo técnico atual | 1000 |
| Velocidade máxima = · 10 · 10 · Modelo técnico atual | 500 |
| Potência do motor Modelo técnico atual · 与 catalog 12 '钢模组'表(180型 100W) 功率不一致，TML180 编码页为 750W，两处按原文录入 | 750 W |
| Diâmetro externo do parafuso Modelo técnico atual | 20 mm |
| Curso de deslocamento Modelo técnico atual | 10-1200 mm |
| Application reference 750 | The source describes steel workbenches for general or clean-room equipment, including CNC, machine-tool and transfer equipment. |
| Motor installation reference 750 | BD:direct installation; BL:outside,left; BR:outside,right; BM:outside,lower. |
| Operating condition 750 | Stroke over600mm may cause resonance; maximum operating speed requires source-table confirmation. No motorRPM condition is printed in this main table. |
| Ordering example (reference) 750 | TML180-L10-S150-BD-P750W-B |
| Allowable overhang reference 750 | The three orientation tables are allowable overhang distances in mm, not speed ratings. Lead50/25 reference rows are distinct from the main lead list on models whose main table does not print those leads. |
| Repeatability (as printed) 750 | +0.02/0.01 mm |
| Main table lead reference 750 | 5/10/20/40 mm |
| Source power difference 750 | Main table750W vs overview selection100W. |
Allowable overhang distances · horizontal · original p.90
| Printed lead/load | A(mm) | B(mm) | C(mm) |
|---|---|---|---|
| Lead50 · 5kg | 1940 mm | 1285 mm | 1264 mm |
| Lead50 · 10kg | 1490 mm | 1125 mm | 1120 mm |
| Lead50 · 15kg | 1210 mm | 1045 mm | 1048 mm |
| Lead25 · 5kg | 1938 mm | 1283 mm | 1260 mm |
| Lead25 · 10kg | 1488 mm | 1122 mm | 1117 mm |
| Lead25 · 22kg | 1235 mm | 1041 mm | 1045 mm |
| Lead10 · 15kg | 1392 mm | 1076 mm | 1079 mm |
| Lead10 · 25kg | 1182 mm | 1020 mm | 1025 mm |
| Lead10 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 50kg | 565 mm | 560 mm | 530 mm |
| Lead05 · - | - mm | - mm | - mm |
A/B/C distance directions correspond to the original installation diagrams, not0°/45°/90° and not speed. All source rows including dash row are retained.
The distance source printsLead50/Lead25 while this model main table lists other lead values; no lead mapping is inferred.
Allowable overhang distances · wall · original p.90
| Printed lead/load | A(mm) | B(mm) | C(mm) |
|---|---|---|---|
| Lead50 · 5kg | 1940 mm | 1285 mm | 1264 mm |
| Lead50 · 10kg | 1490 mm | 112b mm | 1120 mm |
| Lead50 · 15kg | 1210 mm | 1045 mm | 1048 mm |
| Lead25 · 5kg | 1938 mm | 1283 mm | 1260 mm |
| Lead25 · 10kg | 1488 mm | 1122 mm | 1117 mm |
| Lead25 · 22kg | 1235 mm | 1041 mm | 1045 mm |
| Lead10 · 15kg | 1392 mm | 1076 mm | 1079 mm |
| Lead10 · 25kg | 1182 mm | 1020 mm | 1025 mm |
| Lead10 · 30kg | 1111 mm | *6 mm | 750 mm |
| Lead05 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 50kg | 565 mm | 560 mm | 530 mm |
| Lead05 · - | - mm | - mm | - mm |
A/B/C distance directions correspond to the original installation diagrams, not0°/45°/90° and not speed. All source rows including dash row are retained.
The distance source printsLead50/Lead25 while this model main table lists other lead values; no lead mapping is inferred.
Two B cells have nonnumeric/unclear source text:10kg Lead50=112b,30kg Lead10=*6(native text). Intended numbers require source confirmation; neighboring tables are not substituted.
Allowable overhang distances · vertical · original p.90
| Printed lead/load | A(mm) | B(mm) | C(mm) |
|---|---|---|---|
| Lead50 · 5kg | 1940 mm | 1285 mm | 1264 mm |
| Lead50 · 10kg | 1490 mm | 1125 mm | 1120 mm |
| Lead50 · 15kg | 1210 mm | 1045 mm | 1048 mm |
| Lead25 · 5kg | 1938 mm | 1283 mm | 1260 mm |
| Lead25 · 10kg | 1488 mm | 1122 mm | 1117 mm |
| Lead25 · 22kg | 1235 mm | 1041 mm | 1045 mm |
| Lead10 · 15kg | 1392 mm | 1076 mm | 1079 mm |
| Lead10 · 25kg | 1182 mm | 1020 mm | 1025 mm |
| Lead10 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 30kg | 1111 mm | 956 mm | 750 mm |
| Lead05 · 50kg | 565 mm | 560 mm | 530 mm |
| Lead05 · - | - mm | - mm | - mm |
A/B/C distance directions correspond to the original installation diagrams, not0°/45°/90° and not speed. All source rows including dash row are retained.
The distance source printsLead50/Lead25 while this model main table lists other lead values; no lead mapping is inferred.
Fale com a HTROBOT
- Emailemmy@htrobot.com
- Telefone+86 152 0225 5004
- Loja AlibabaVisitar a nossa loja Alibaba