Maximum stroke: This determines the maximum workpiece size that the machine can process. For example, the maximum stroke of some gantry CNC machine tools can reach 2100mm, 1600mm, and 760mm.
Workbench size: The workbench is the working area on a machine tool, and its size directly affects the size of the workpiece that can be processed. For example, the workbench size of some machine tools can reach 4000 * 1600mm.
Spindle speed: Spindle speed refers to the number of times the machine tool spindle rotates per minute, which affects the accuracy and efficiency of machining. For example, the spindle speed range can range from 10-6000r/min to 4503rpm.
Rapid feed rate and cutting feed rate: These parameters determine the speed of the machine tool during rapid movement to the machining position and actual cutting, affecting machining efficiency. For example, the rapid feed rate can reach X/Y axis: 20000mm/min; Z-axis: 15000mm/min.
Positioning accuracy and repeatability: These parameters reflect the accuracy of the machine tool during the machining process and are important indicators for evaluating the performance of the machine tool. For example, the positioning accuracy can reach ± 0.015mm per full length, and the repeatability accuracy is ± 0.003mm.
3 axis robot compared with similar products on the market, it has incomparable outstanding advantages in terms of performance, quality, appearance, etc., and enjoys a good reputation in the market.Haotian Robot summarizes the defects of past products, and continuously improves them. The specifications of 3 axis robot can be customized according to your needs.
1. Their rigid structure and linear motion enable them to move heavy objects.
2. Multiple robots can be controlled using one controller without the need for PLC solutions or IO between multiple controllers.
3. They allow for a long travel of approximately 2 meters, allowing them to move heavy objects over long distances.
4. Their actions and functions are highly accurate and repeatable.
5. Their rapid movement speed and acceleration reduce cycle time.
6. The ability to set two units on the Z-axis and double arms reduces installation space.
7. Almost any type of linear actuator can be combined with any type of driving mechanism (including belts, balls or guide screws, pneumatic actuators, or linear motors) to construct.
