KTH12Integrated ball-screw linear module · HTH12

KTH12 belongs to Integrated ball-screw linear module in the Linear modules catalog.

Series: Integrated ball-screw linear module
Configurations: None listed; specify yours in the inquiry

KTH12 · Ball screw linear modules

A screw-driven linear module converts rotary drive into carriage travel. For a positioning axis, compare screw lead, usable stroke and the installation space for the carriage and motor.

Comparing KTH12

For KTH12, compare these listed entries: Stroke range: 100-1250 mm；Motor power: 400 W. Read positioning, load and speed under the same lead and installation conditions. For vertical motion, include holding and brake requirements in the axis proposal.

Parameters and where they apply

Permissible overhang moment MP Current technical model	606 Nm
Permissible overhang moment MR Current technical model	1168 Nm
Permissible overhang moment MY Current technical model	606 Nm
Horizontal catalog load = · 32 · 32 · Current technical model	30 kg
Horizontal catalog load = · 20 · 20 · Current technical model	40 kg
Horizontal catalog load = · 5 · 5 · Current technical model	110 kg
Horizontal catalog load = · 10 · 10 · Current technical model	88 kg
Vertical catalog load = · 5 · 5 · Current technical model	33 kg
Vertical catalog load = · 20 · 20 · Current technical model	10 kg
Vertical catalog load = · 10 · 10 · Current technical model	11 kg
Vertical catalog load = · 32 · 32 · Current technical model	8 kg
Rated thrust = · 10 · 10 · Current technical model	480 N
Rated thrust = · 32 · 32 · Current technical model	200 N
Rated thrust = · 20 · 20 · Current technical model	240 N
Rated thrust = · 5 · 5 · Current technical model	954 N
Catalog speed (see the stroke/speed table) = · 32 · 32 · Current technical model · Resonance may occur above 600 mm stroke; use the corresponding stroke/speed table for maximum operating speed.	1600 mm/s
Catalog speed (see the stroke/speed table) = · 20 · 20 · Current technical model · Resonance may occur above 600 mm stroke; use the corresponding stroke/speed table for maximum operating speed.	1000 mm/s
Catalog speed (see the stroke/speed table) = · 5 · 5 · Current technical model · Resonance may occur above 600 mm stroke; use the corresponding stroke/speed table for maximum operating speed.	250 mm/s
Catalog speed (see the stroke/speed table) = · 10 · 10 · Current technical model · Resonance may occur above 600 mm stroke; use the corresponding stroke/speed table for maximum operating speed.	500 mm/s
Motor power Current technical model	400 W
Repeatability (source wording) Current technical model	±0.01 mm
Screw outer diameter (source wording) Current technical model	016
Stroke interval Current technical model	50 mm
Movement distance Current technical model	100-1250 mm

Allowable overhang distances · horizontal · original p.103

Printed lead/load	A(mm)	B(mm)	C(mm)
5 · 60kg	2850 mm	250 mm	340 mm
5 · 80kg	2100 mm	180 mm	250 mm
5 · 110kg	1500 mm	120 mm	170 mm
10 · 30kg	2850 mm	490 mm	600 mm
10 · 50kg	1700 mm	280 mm	350 mm
10 · 88kg	950 mm	140 mm	190 mm
20 · 10kg	3400 mm	1250 mm	1400 mm
20 · 22kg	1650 mm	S50 mm	620 mm
20 · 40kg	900 mm	290 mm	330 mm
32 · 15kg	1100 mm	570 mm	550 mm
32 · 25kg	620 mm	330 mm	320 mm
32 · 30kg	520 mm	270 mm	260 mm

Original installation-conditioned distances(mm), separate from speed and saleable configurations. Blanks/dashes and source row positions are retained. No neighboring-axis or model substitution.

Source nonnumeric glyphs ISO/S3/S50 are retained as visible literals; intended numeric values require confirmation.

The original vertical table has A/C columns only; B is not specified, not zero.

Allowable overhang distances · side · original p.103

Printed lead/load	A(mm)	B(mm)	C(mm)
5 · 55kg	280 mm	280 mm	3300 mm
5 · 75kg	200 mm	195 mm	2400 mm
5 · 110kg	130 mm	125 mm	1550 mm
10 · 35kg	400 mm	420 mm	2500 mm
10 · 55kg	245 mm	250 mm	1550 mm
10 · 88kg	150 mm	150 mm	950 mm
20 · 12kg	900 mm	1070 mm	3000 mm
20 · 20kg	550 mm	630 mm	1800 mm
20 · 40kg	260 mm	300 mm	900 mm
32 · 15kg	440 mm	570 mm	1050 mm
32 · 30kg	210 mm	270 mm	520 mm
32 ·	mm	mm	mm

Original installation-conditioned distances(mm), separate from speed and saleable configurations. Blanks/dashes and source row positions are retained. No neighboring-axis or model substitution.

The original vertical table has A/C columns only; B is not specified, not zero.

Allowable overhang distances · vertical · original p.103

Printed lead/load	A(mm)	B(mm)	C(mm)
5 · 15kg	1200 mm	mm	1200 mm
5 · 22kg	820 mm	mm	820 mm
5 · 33kg	550 mm	mm	550 mm
10 · 10kg	1600 mm	mm	1600 mm
10 · 14kg	1150 mm	mm	1150 mm
10 · 22kg	730 mm	mm	730 mm
20 · 7kg	1800 mm	mm	1800 mm
20 · 10kg	1250 mm	mm	1250 mm
20 ·	mm	mm	mm
32 · 5kg	1600 mm	mm	1600 mm
32 · 8kg	1000 mm	mm	1000 mm
32 ·	mm	mm	mm

Original installation-conditioned distances(mm), separate from speed and saleable configurations. Blanks/dashes and source row positions are retained. No neighboring-axis or model substitution.

The original vertical table has A/C columns only; B is not specified, not zero.

Ordering, installation and application references

Scope	Current source reference
ordering	KTH12-L10-S100-BD-P400W-B. Example fields:model/lead/stroke/motor direction/brand-power/brake. BD:direct;BL:left;BR:right;BM:lower. M:Mitsubishi/Y:Yaskawa/P:Panasonic/T:Delta. Example is a source ordering reference, not a product identity.
installation	Original BD/BR page104 and BL/BM105; installation tables begin50mm whereas main travel range begins100mm. Extra drawing row does not create a50mm saleable configuration.
application	Clean-room-oriented compact embedded screw slide with integrated slider/slide seat, U-shaped base and cover. Source applications:FPD, semiconductor/medical automation, precision measuring instruments and automation equipment. Actual cleanliness and system suitability need application confirmation.
source-scope	Existing primary values and nine correctedmm/s speed cells are retained. Source table gives no model-specific replacement long-stroke speed. Header Stroke(N) is anomalous beside travel context; no force interpretation. Moment headerN.m with printed cell(N) is retained privately; no new correction is inferred.

Talk to HTROBOT

Open inquiry draft →