Manufacturer illustration MTH12 manufacturer product render Open full-resolution source image

Linear modules · Integrated linear module

MTH12Integrated linear module KTH12

MTH12 belongs to Integrated linear module in the Linear modules catalog.

Series: Integrated linear module
Configurations: None listed; specify yours in the inquiry

MTH12 · Ball screw linear modules

A screw-driven linear module converts rotary drive into carriage travel. For a positioning axis, compare screw lead, usable stroke and the installation space for the carriage and motor.

Comparing MTH12

For MTH12, compare these listed entries: Maximum stroke: 1050 mm；Motor power: 400 W. Read positioning, load and speed under the same lead and installation conditions. For vertical motion, include holding and brake requirements in the axis proposal.

Parameters and where they apply

Ball-screw lead (mm)	Maximum speed · 3000 rpm (mm/s)	Horizontal load (kg)	Vertical load (kg)	Rated thrust (N)
5	250	110	33	1388
10	500	88	22	694
20	1000	40	10	347
32	1600	30	8	218

Stroke over800mm requires lower speed; replacement speed ratings are not printed.

Main1250mm/ordering1050mm source conflict is retained.

Maximum stroke Current technical model	1050 mm
Motor power Current technical model	400 W
Ball screw diameter 400	16 mm
Motor installation reference 400	BC: outside; BL: left; BR: right; BM: lower. Source ordering reference only.
Power output (table condition) 400	400 W
Ordering example (reference) 400	MTH12-L05-500-BC-F0-40-B-C4
Overhang MP 400	606 N.m
Overhang MR 400	606 N.m
Overhang MY 400	1168 N.m
Repeatability C · 400	±0.01 mm
Repeatability P · 400	±0.008 mm
Sensor ordering reference 400	C4:672/674 photoelectric switch; E5:not supplied. No outside/inside or motor-direction mapping is inferred.
Original accuracy code reference 400	Main table C±0.01/P±0.008; ordering code L±0.01/P±0.008. The original code letters are retained, not merged.
Stroke increment 400	50 mm
Stroke range 400	50–1250 mm
Source stroke conflict 400	Main table and overview:50–1250mm; ordering column:50–1050mm. Confirm the conflicting1050/1250 limits for stroke above1050; do not silently replace either source.

Talk to HTROBOT

Open inquiry draft →