Model reference MTH8 source product illustration Open full-resolution source image

Linear modules · Integrated linear module

MTH8Integrated linear module KTH8

MTH8 belongs to Integrated linear module in the Linear modules catalog.

Series: Integrated linear module
Configurations: None listed; specify yours in the inquiry

MTH8 · Ball screw linear modules

A screw-driven linear module converts rotary drive into carriage travel. For a positioning axis, compare screw lead, usable stroke and the installation space for the carriage and motor.

Comparing MTH8

For MTH8, compare these listed entries: Maximum stroke: 1050 mm；Motor power: 200 W. Read positioning, load and speed under the same lead and installation conditions. For vertical motion, include holding and brake requirements in the axis proposal.

Parameters and where they apply

Ball-screw lead (mm)	Maximum speed · 3000 rpm (mm/s)	Horizontal load (kg)	Vertical load (kg)	Rated thrust (N)
5	250	50	15	683
10	500	30	8	341
20	1000	18	3	174
32	1600	9	-	85

Stroke over750mm requires lower speed; replacement speed ratings are not printed.

The source dash is not a zero or a documented vertical rating.

Maximum stroke Current technical model	1050 mm
Motor power Current technical model	200 W
Ball screw diameter 200	16 mm
Motor installation reference 200	BC: outside; BL: left; BR: right; BM: lower. Source ordering reference only.
Power output (table condition) 200	200 W
Ordering example (reference) 200	MTH8-L05-500-BC-F0-20-B-C4
Overhang MP 200	320 N.m
Overhang MR 200	630 N.m
Overhang MY 200	320 N.m
Repeatability C · 200	±0.01 mm
Repeatability P · 200	±0.008 mm
Sensor ordering reference 200	C4:672/674 photoelectric switch; E5:not supplied. No outside/inside or motor-direction mapping is inferred.
Original accuracy code reference 200	Main table C±0.01/P±0.008; ordering code L±0.01/P±0.008. The original code letters are retained, not merged.
Stroke increment 200	50 mm
Stroke range 200	50–1050 mm

Talk to HTROBOT

Open inquiry draft →