PDFs are in English (EN).
Linear modules · MC series sealed linear modules for clean rooms
MC135Sealed linear module for clean rooms HTMC135
MC135 belongs to MC series sealed linear modules for clean rooms in the Linear modules catalog.
MC135 · Ball screw linear modules
A screw-driven linear module converts rotary drive into carriage travel. For a positioning axis, compare screw lead, usable stroke and the installation space for the carriage and motor.
Comparing MC135
For MC135, compare these listed entries: Maximum stroke: 1050 mm；Motor power: 400 W. Read positioning, load and speed under the same lead and installation conditions. For vertical motion, include holding and brake requirements in the axis proposal.
Parameters and where they apply
| Ball-screw lead (mm) | Maximum speed (mm/s) | Horizontal load (kg) | Vertical load (kg) | Rated thrust (N) |
|---|---|---|---|---|
| 5 | 250 | 95 | 27 | 1388 |
| 10 | 500 | 75 | 18 | 694 |
| 16 | 800 | 44 | 7 | 433 |
| 20 | 1000 | 35 | 6 | 347 |
Main table applies to 400W output; other ordering motor options do not inherit these ratings.
The source does not state motor rpm for these speeds. Stroke over 750mm requires lower speed; replacement speeds are not documented.
| Ball-screw specification Current technical model | 16 mm |
|---|---|
| Maximum speed Current technical model | 1000 mm/s |
| Maximum stroke Current technical model | 1050 mm |
| Motor power Current technical model | 400 W |
| Ball screw diameter 400 | 16 mm |
| Ball screw grade 400 | C7 |
| Coupling dimensions 400 | 14x10 mm |
| Linear guide 400 | 15x12.5 mm |
| Power output (table condition) 400 | 400 W |
| Overhang MP 400 | 552 Nm |
| Overhang MR 400 | 485 Nm |
| Overhang MY 400 | 551 Nm |
| Repeatability 400 | ±0.01 mm |
| Sensor model · inside 400 · inside | EE-SX674 |
| Sensor model · outside 400 · outside | EE-SX672 |
| Stroke increment 400 | 50 mm |
| Stroke range 400 | 100–1050 mm |
Talk to HTROBOT
- Emailemmy@htrobot.com
- Phone+86 152 0225 5004
- Alibaba storeVisit our Alibaba store