Linear modules · HTMKK
MKK60HTMKK · MKK60
MKK60 belongs to HTMKK in the Linear modules catalog.
MKK60 · Ball screw linear modules
A screw-driven linear module converts rotary drive into carriage travel. For a positioning axis, compare screw lead, usable stroke and the installation space for the carriage and motor.
Comparing MKK60
For MKK60, compare these listed entries: Body width: 60 mm；Ball-screw lead: MKK6005: 5 mm · MKK6010: 10 mm. Read positioning, load and speed under the same lead and installation conditions. For vertical motion, include holding and brake requirements in the axis proposal.
Parameters and where they apply
| Body width Current technical model | 60 mm |
|---|---|
| Dynamic load 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | [3744, 3377] N |
| Dynamic load 10 · Source-data condition; no sellable-configuration relationship has been established · MKK6010 | [2410, 2107] N |
| Lead 10 · Source-data condition; no sellable-configuration relationship has been established · MKK6010 | 10 mm |
| Lead 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | 5 mm |
| Moment field MP_Nm_A1_A2 (source field) 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | [72, 367] Nm |
| Moment field MR_pitch_Nm_A1_A2 (source field) 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | [152, 760] Nm |
| Moment field MR_rolling_Nm_A1_A2 (source field) 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | [419, 838] Nm |
| Moment field MR_rolling_Nm_S1_S2 (source field) 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | [241, 482] Nm |
| Screw outer diameter 10 · Source-data condition; no sellable-configuration relationship has been established · MKK6010 | 12 mm |
| Screw outer diameter 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | 12 mm |
| Slider A basic dynamic load rating 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | 13230 N |
| Slider A static load rating 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | 21462 N |
| Slider S basic dynamic load rating 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | 7173 N |
| Slider S static load rating 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | 11574 N |
| Static load 5 · Source-data condition; no sellable-configuration relationship has been established · MKK6005 | [6243, 5625] N |
| Static load 10 · Source-data condition; no sellable-configuration relationship has been established · MKK6010 | [3743, 3234] N |
| Maximum payload mass Current technical model | 42 kg |
| Maximum stroke (source wording) Current technical model | 500 |
| Application reference | The source describes a modular steel-base linear module integrating a ball screw and linear guide for common-environment equipment, with four-direction load support and a U-section rail. |
| Installation reference | The source provides HR/HL right/left motor mounting,standard/light slide variants and cover/bellows options. Choose mounting dimensions for that exact variant. |
| Lubrication source reference | Source grease guidance:replenish after100km travel for speed not exceeding60m/min. Interval T=100×1000/(Ve×60)hours,Ve in m/min. Source grease-nipple layouts distinguish single and double slides. |
| Ordering example (reference) | MKK60 10 P E-400 E A2 E-F0 C S0 M |
| Rated-life source reference | Source formulas:guide L=((ft/fw)*(C/Pn))^3*50km;screw/bearing L=((1/fw)*(Ca/Pa,n))^3*10^6rev. Guide ft:A1/S1=1.0,A2/S2=0.81. fw:smooth/no impact,V<15m/min:1.0–1.5;normal15<V<60:1.5–2.0;impact/vibration,V>60:2.0–3.5. Source module rated life takes the smaller guide/screw result. |
| Sensor ordering reference | S0:limit body only; S1:SX671; S2:SX674; S3:GX-F12A; S4:GX-F12A-P; no mark:none. |
| Ordering reference | MKK sizes50/60/86; MKK60 ordering lead5/10mm,body length150/200/300/400/500/600mm; P:precision/C:general; A:standard/S:light slide; quantity1/2. E denotes special machining; unmarked denotes standard. C:aluminum cover/B:bellows/unmarked:no cover. M:motor attached/unmarked:no motor. |
| Section height H(as printed) | 33 |
| Section area moment Ix | 20560.0 mm^4 |
| Section area moment Iy | 280200.0 mm^4 |
Maximum-speed source reference · original p.40
| Lead(mm) | Rail length L2(mm) | Precision P | General C |
|---|---|---|---|
| 5 | 150 | 550 mm/s | 390 mm/s |
| 5 | 200 | 550 mm/s | 390 mm/s |
| 5 | 300 | 550 mm/s | 390 mm/s |
| 5 | 400 | 550 mm/s | 390 mm/s |
| 5 | 500 | 550 mm/s | 390 mm/s |
| 5 | 600 | 340 mm/s | 340 mm/s |
| 10 | 150 | 1100 mm/s | 790 mm/s |
| 10 | 200 | 1100 mm/s | 790 mm/s |
| 10 | 300 | 1100 mm/s | 790 mm/s |
| 10 | 400 | 1100 mm/s | 790 mm/s |
| 10 | 500 | 1100 mm/s | 790 mm/s |
| 10 | 600 | 670 mm/s | 670 mm/s |
Rail length L2 is distinct from carriage travel; source values remain tied to their rail length,lead and grade.
Accuracy class source reference · original p.39
| Rail length(mm) | Grade | Position repeatability | Position accuracy | Travel parallelism | Starting torque |
|---|---|---|---|---|---|
| 150/200/300/400 | P | ±0.003 mm | 0.020 mm | 0.010 mm | 15 N-cm |
| 150/200/300/400 | C | ±0.01 mm | - mm | - mm | 7 N-cm |
| 500/600 | P | ±0.003 mm | 0.025 mm | 0.015 mm | 15 N-cm |
| 500/600 | C | ±0.01 mm | - mm | - mm | 7 N-cm |
The source explicitly labels positional units mm and starting torque N-cm. A dash is retained without a numerical rating.
Ball-screw source ratings · MKK6005 · original p.38
| Parameter/grade | Current source value |
|---|---|
| Nominal screw diameter | 12 mm |
| Lead | 5 mm |
| P ball-screw dynamic rating | 3744 N |
| P ball-screw static rating | 6243 N |
| C ball-screw dynamic rating | 3377 N |
| C ball-screw static rating | 5625 N |
Guide source ratings · MKK6005 · original p.38
| Slide type | Dynamic rating | Static rating |
|---|---|---|
| A | 13230 N | 21462 N |
| S | 7173 N | 11574 N |
Permissible static moments · MKK6005 · original p.38
| Slide | Pitch MP | Yaw MY | Roll MR |
|---|---|---|---|
| A1 | 152 N-m | 152 N-m | 419 N-m |
| A2 | 760 N-m | 760 N-m | 838 N-m |
| S1 | 72 N-m | 72 N-m | 241 N-m |
| S2 | 367 N-m | 367 N-m | 482 N-m |
Ball-screw source ratings · MKK6010 · original p.38
| Parameter/grade | Current source value |
|---|---|
| Nominal screw diameter | 12 mm |
| Lead | 10 mm |
| P ball-screw dynamic rating | 2410 N |
| P ball-screw static rating | 3743 N |
| C ball-screw dynamic rating | 2107 N |
| C ball-screw static rating | 3234 N |
Guide source ratings · MKK6010 · original p.38
| Slide type | Dynamic rating | Static rating |
|---|---|---|
| A | 13230 N | 21462 N |
| S | 7173 N | 11574 N |
Permissible static moments · MKK6010 · original p.38
| Slide | Pitch MP | Yaw MY | Roll MR |
|---|---|---|---|
| A1 | 152 N-m | 152 N-m | 419 N-m |
| A2 | 760 N-m | 760 N-m | 838 N-m |
| S1 | 72 N-m | 72 N-m | 241 N-m |
| S2 | 367 N-m | 367 N-m | 482 N-m |
Talk to HTROBOT
- Emailemmy@htrobot.com
- Phone+86 152 0225 5004
- Alibaba storeVisit our Alibaba store